Our Trinity crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Morgan County within days.
Written quote at no cost, one callback, no chasing afterwards.
Looking to swap out that old, dusty soaking basin for a sleek, modern step-in wash stall? Our local team delivers quick turnarounds and beautiful home updates without taking forever to finish up.
Every single morning starts with a clumsy hurdle over a slippery porcelain barrier. That giant basin sitting in your space seemed cool years ago, but now it just takes up way too much floor area while catching soap scum... Frankly, nobody has time to scrub those stubborn rings anymore!
Swapping that clunky fixture for a flat threshold changes your whole daily routine completely. You instantly get extra elbow room to stretch out while washing off a long workday without bumping into stained glass doors.
On top of that, your entire washroom looks twice as big as soon as that giant wall gets knocked down. A spacious walk-in area gives off pure luxury and total ease without making you spend a fortune.
Surprisingly, most folks are shocked at how fast our crew can whip a room into shape. You go to work with an old tub, then come back home to a slick modern setup ready for use.
Let us talk straight about your water bills for a minute. Filling up a giant standard basin uses dozens of gallons every single time you want to soak your back.
Meanwhile, a low-flow head in a modern step-in setup cuts that waste way down without dropping your spray pressure. So, you end up saving hard-earned cash while actually enjoying your quick morning routine a lot more.
Besides, those deep corners under old porcelain basins love to hide hidden mold and nasty rotted drywall. Water sloshes over the edge, creeps under your tile floor, and quietly rots out your subfloor joists over time.
By pulling out the old tub, we catch those hidden structural leaks before your floor completely gives out. Catching rotting wood early saves you thousands in surprise emergency tear-outs later on!
To give you a better idea, here is how the two setups stack up side by side:
| Feature | Old Basin Setup | New Step-In Stall |
|---|---|---|
| Water Usage per Wash | 35 to 50 gallons | 12 to 20 gallons |
| Cleaning Time Needed | 45 minutes of heavy scrubbing | 10 minutes with a mild wipe |
| Entry Barrier Height | 14 to 18 inches high | 0 to 4 inches max |
| Risk of Subfloor Rot | High due to sloshing water | Low thanks to custom pans |
Every single home tells a story around these parts, especially inside localized ZIP codes like 35673. From cozy ranch layouts to newer modern builds across this charming town of 2,972 residents, washrooms come in all kinds of funky shapes.
Therefore, off-the-shelf kits from big box stores rarely fit right without leaving ugly gaps around your trim. Our team cuts custom acrylic panels and heavy-duty pans right on site so everything seals up bone dry.
Furthermore, local homeowners with a median household income around $59,615 want real durability that actually lasts rather than cheap plastic panels that flex under pressure. We stick to heavy acrylic wall surrounds that resist cracking, yellowing, or popping off the sheetrock.
Honestly, my uncle tried setting up a cheap store kit himself back in the day and ended up flooding his hallway! That mess showed me why properly sloped drain pans and heavy-duty waterproofing matter so much when remodeling.
Starting your project means picking out custom colors, cool wall textures, and smart storage units. You can ditch those messy hanging wire racks for built-in corner caddies that hold giant shampoo bottles easily.
Additionally, we install sturdy grab bars, flip-down seating, and anti-slip flooring textures that look amazing while keeping everyone safe. High-end finishes don't have to look like a sterile hospital room, either!
Next, glass door choices let you customize how open or cozy your new wash station feels. Choose frameless clear panels to make your space feel massive, or frosted sliding panels for extra privacy during busy mornings.
Whichever design you pick, you get built-in protection against mineral buildup and hard water stains. That means less time cleaning glass and more time kicking back on weekends.
First, our skilled mechanics lay down heavy canvas tarps to shield your hallway carpets and hardwood floors from dust. We treat your property with absolute respect, taking extra care around walls and doorways.
Then, we carefully rip out the old cast iron or fiberglass basin alongside wet drywall and crusty plumbing valves. If we spot old rusted pipes behind the wall, we swap them out for clean new PEX lines.
After that, we level your floor joists and drop in a custom leak-proof base pan right over the subfloor. A quick test ensures every drop of water flows straight down the main drain line without pooling in corners.
Finally, our crew glues up high-grade acrylic wall shells, seals every joint with silicone, and mounts your sleek hardware. You end up with a high-end wash bay built for years of total relaxation.
Basically, future home buyers love seeing modern step-in upgrades whenever they tour local neighborhoods. Buyers usually pass on homes with cracked, stained tubs that look like projects waiting to happen.
Instead, a fresh wash area gives your entire home a rich, updated vibe that instantly stands out. Investing in your washroom pays back big time when you decide to sell your place later on down the road.
Beyond future sales, you get to enjoy absolute convenience and total peace of mind every single day. Stepping onto a textured floor with plenty of room to move around makes mornings feel effortless.
Plus, smooth acrylic surfaces block soap scum and mildew from taking root on your wall seams. A quick spray with warm water keeps everything shining like brand new without any backbreaking effort.
Starting a home project should feel exciting instead of stressful or crazy expensive! That is why we swing by your property to take careful measurements and examine your existing plumbing lines firsthand.
After checking out your layout, we lay out clear options that align perfectly with your project budget. You get a firm price right on paper, with no weird hidden extras tacked on later.
Furthermore, our team handles all the heavy lifting, permits, and haul-away so you never worry about disposing of heavy waste. We toss your old heavy porcelain unit into our truck and leave your space sparkling clean.
So, why keep struggling over a high barrier every single morning when a modern upgrade is super affordable? Getting your project rolling is as simple as scheduling a quick walkthrough with our friendly team today!
Reaching out to our friendly crew takes just a minute of your time to set up. We work completely around your busy schedule, showing up right on time to discuss your ideal washroom layout.
During our quick visit, you get to feel real surface samples and choose custom hardware finishes in person. We walk through every step so you know exactly what happens during your home project.
Ultimately, upgrading your home should feel simple, rewarding, and completely stress-free from start to finish. Our local crew takes total pride in delivering top-tier work that brings ultimate relaxation back into your daily routine.
Contact our dedicated installers right now to secure your no-obligation site check and detailed zero-cost quote! Let us help you turn that tired old basin into an incredible walk-in setup you will love forever.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Trinity repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Morgan County; the statewide picture lives on Alabama; the wider region is the South; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote