Across Ralls County, bathtubs that retired years ago give way to showers built in their own footprint.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high, slippery barrier every single morning just to wash off. This common daily struggle actually causes a lot of unnecessary stress and slip hazards in your home. By swapping that old, deep basin for a modern walk-in option, you instantly create a much safer and cleaner space to wash up.
Actually, making this smart switch does wonders for your daily routine. You get to enjoy a fast, breezy rinse without the hassle of climbing into a giant tub that you never even fill with water anyway. Since your safety and time matter, this quick upgrade represents the ultimate way to modernize your property.
If you want to make this change happen without any stress, we are right here to help you out. Our friendly local team loves visiting homes to chat about options and give you a completely free project estimate. You can finally get the modern setup of your dreams without any guesswork.
Think about how much space that old, unused basin wastes in your bathroom right now. When you replace it with a low-profile basin and glass enclosure, you suddenly open up the entire room. This layout change gives you extra physical breathing room and makes your whole home feel much more spacious.
In addition to saving physical space, cleaning becomes an absolute breeze after this upgrade. Old tubs have all those weird corners where grime and mold love to hide out of sight. Modern solid-surface walls let you wipe down the entire area in just a couple of minutes with zero hard scrubbing.
On top of that, your new setup adds incredible accessibility for everyone in the household. Whether you have older relatives visiting or you just want to plan for the future, a low threshold removes the fear of falling. This simple change brings peace of mind and cozy satisfaction to your daily life.
| Feature | Old Deep Basin Setup | Modern Walk-In Option |
|---|---|---|
| Step-In Height | 15 to 20 inches high | Less than 3 inches |
| Cleaning Effort | High scrubbing needed | Quick wipe down |
| Visual Space | Cramped and closed off | Open and bright |
| Safety Level | High slip risk | Very secure |
Naturally, you might worry about how long your bathroom will remain under construction and messy. Our skilled crew works fast to tear out the old cast iron or acrylic unit with minimal disruption to your home. We carefully inspect the subfloor underneath to ensure no hidden water damage exists before we proceed.
Once we verify that your plumbing and flooring are perfectly solid, we install the new slip-resistant base. This critical step ensures that water drains away flawlessly every single time you rinse off. After that, we mount beautiful, durable wall surrounds that match your personal style perfectly.
Because we respect your busy schedule, we aim to finish the physical labor quickly and clean up every speck of dust. You do not have to live in a messy construction zone for weeks on end. We make the entire process smooth and straightforward so you can just enjoy the final result.
Choosing the right fixtures lets you tailor the entire experience to your exact needs. For example, you can add built-in seating to enjoy a relaxing, hands-free wash whenever you feel tired. This handy feature transforms a basic washroom into a serene personal retreat.
Another smart upgrade involves adding sturdy grab bars that blend beautifully with your shiny new hardware. These secure handles offer extra support without looking like a cold hospital room. You get a perfect mix of safety and modern style all in one package.
To make things even better, customizable corner shelves keep all your shampoos and soaps organized and off the floor. You will love having everything at arm's reach instead of cluttering up the corners of your basin. It is the little details that make your daily routine feel so good.
Investing in your home is always a big decision, especially here in the beautiful state of Missouri. Many people living in the local area, which includes communities across Ralls County, are actively looking for ways to boost their property value. A modern wash setup is one of the most requested features among home buyers today.
With a local population of around ten thousand people, keeping homes updated helps maintain strong neighborhood charm. Families here appreciate practical upgrades that make life easier and safer. Our local experts know exactly how to handle the specific plumbing styles found in these regional homes.
Whether your household income matches the local median or you are working with a tight budget, we offer solutions that fit. We serve various neighborhoods, including those under ZIP code 63401 and surrounding areas, with pride and dedication. Our goal is to deliver top-notch work that fits your financial comfort zone perfectly.
Tackling a plumbing and tile project on your own often leads to massive headaches and unexpected leaks. Our trained crew possesses the proper tools and hands-on experience to handle every single twist and turn. We take care of the permits, the heavy lifting, and the technical plumbing connections for you.
This means you can sit back and relax while we do all the dusty, hard work. We stand behind our craftsmanship because we want you to feel completely confident in your home upgrade. Your satisfaction is our absolute priority from the moment we knock on your door.
To help you get started, we would love to visit your home and look at your current layout. We will listen to your ideas, answer your questions, and provide a detailed estimate at no cost. Reach out to us today to schedule your free home consultation!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote