Across Cooper County, bathtubs that retired years ago give way to showers built in their own footprint.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high, slippery wall every single morning just to wash up. Because of this daily hassle, many local homeowners now choose to swap their old deep tubs for a modern walk-in bathing space. This simple change instantly creates a safer environment and makes your daily routine feel like a breeze.
Fortunately, our dedicated team helps you make this transition without any of the typical remodeling headaches. When you decide to update your home, we come directly to your property to assess the space and give you a detailed plan. This means you get a clear picture of the project costs right away with our completely free project estimates.
Honestly, who actually has time to sit and soak in a giant basin these days anyway? Since our lives keep getting busier, most of us just want a quick, refreshing wash under a steady stream of warm water. By making this smart switch, you reclaim valuable square footage and give your layout a clean, contemporary look.
First of all, safety stands out as the absolute biggest reason to make this upgrade. If you or your loved ones plan to age in place, removing that high barrier reduces the risk of nasty slips and falls. Which means you gain peace of mind every time you step into the stall.
In addition to safety, cleaning becomes infinitely easier once you get rid of old porcelain basins. Since we install high-quality, non-porous acrylic surrounds, you can say goodbye to scrubbing moldy grout lines on your hands and knees. This lets you spend your weekends relaxing instead of fighting stubborn water stains.
To help you compare your options, we put together a quick breakdown of how these two setups match up in daily life:
| Feature | Old High-Wall Basin | Modern Walk-In Setup |
|---|---|---|
| Entry Height | Usually 15 to 18 inches | Low threshold (under 3 inches) |
| Maintenance | Heavy scrubbing required | Simple wipe-down cleaning |
| Space Saving | Bulky and cramped | Open and airy feeling |
Naturally, your home value also gets a nice little bump from this modern transformation. Homebuyers actively look for properties that feature updated, accessible washrooms rather than outdated fixtures from decades ago. Thus, this investment pays off both in daily enjoyment and future resale potential.
Now, you might wonder how we actually pull off this impressive transformation in your home. Initially, our crew carefully removes your existing cast iron or steel basin without damaging the surrounding walls or floorboards. This crucial step requires real muscle and the right tools to avoid any plumbing disasters.
After the old unit is out, we inspect the underlying subfloor and wood framing for any hidden water damage or rot. If we find any issues, we repair them immediately so your new setup rests on a rock-solid foundation. On top of that, we reroute your drain pipes to align perfectly with the new center or end drain location.
Next, we install the heavy-duty pan and seal it tightly against water leaks using advanced waterproofing membranes. Then, we fit the beautiful new wall panels and install your chosen fixtures, like a sliding glass door or a sleek rain showerhead. Finally, we clean up every speck of dust so you can enjoy your gorgeous space right away.
Perhaps you worry that a walk-in setup might look plain or institutional. On the contrary, we offer an incredible variety of colors, textures, and patterns that mimic high-end stone or classic subway tile. This lets you design a custom look that matches your personal taste perfectly without breaking the bank.
Besides the walls, you can choose from various convenient accessories to maximize your comfort. For instance, we can install built-in corner shelves for your shampoos, sturdy grab bars for extra balance, or even a comfortable fold-down bench seat. Consequently, you get a tailored space that works specifically for your physical needs.
To give you some inspiration, here are the most popular add-ons our customers choose:
| Accessory Type | Primary Benefit |
|---|---|
| Safety Grab Bars | Provides extra stability on slippery surfaces |
| Built-in Niches | Keeps soaps and bottles organized and off the floor | Allows you to sit down comfortably while washing |
Clearly, these small details turn a simple daily task into a truly relaxing experience. Since we customize every single aspect of the job, you never have to settle for a cookie-cutter bathroom. We work closely with you during the design phase to ensure every shelf and bar sits at the perfect height.
Living here in Cooper County means you appreciate honest, hard-working local folks who treat your home with respect. With a tight-knit population of around 17,000 residents living across zip codes like 65233 and 65025, community trust means absolutely everything to us. Since we operate right here in this beautiful area of the Show-Me State, we always aim to deliver top-notch craftsmanship that makes our neighbors proud.
Because local homes vary from historic farmhouses to modern suburban properties, we know how to handle all kinds of unique plumbing challenges. Whether your home has old galvanized pipes or modern PEX lines, our crew adapts quickly to get the job done right. We understand the local building codes inside and out, which ensures your project meets every single safety standard.
Given that the median household income in our area sits around $60,000, we know how important it is to get real value for your hard-earned dollars. That is why we focus on durable materials that stand the test of time without requiring expensive maintenance down the road. We believe everyone deserves a beautiful, safe bathroom that fits comfortably within their family budget.
Usually, we finish the entire tear-out and installation process in just two to three days. Since we know how disruptive home remodeling can be, we work quickly and efficiently to minimize your downtime. This means you will not have to live in a messy construction zone for weeks on end.
Yes, we can install a deep-soaking walk-in tub with a secure door if you still want the option to soak. However, most homeowners find that a spacious walk-in stall with a comfortable bench gives them everything they need. We can discuss all these design variations during your free consultation.
Absolutely, because we use advanced triple-seal technology and premium commercial-grade silicone at every single joint. Our professional installers slope the pan perfectly toward the drain so water never pools near the entrance. This guarantees your bathroom floors stay bone-dry and safe from water damage.
Now, you do not have to live with an outdated, hazardous setup that makes you dread your morning routine. Our friendly local team stands ready to help you transform your space into a bright, open oasis that you actually look forward to using. By choosing us, you get reliable local service from professionals who genuinely care about your satisfaction.
So, why wait any longer to make this important improvement to your home? You can easily schedule a visit from one of our friendly technicians to look at your space and discuss your ideas. We will answer all your questions, show you physical material samples, and leave you with a highly accurate, no-obligation estimate.
Simply reach out to us today to request your completely free project quote. Let us show you how simple and affordable it can be to upgrade your daily routine. We look forward to helping you build a safer, more beautiful home very soon!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote