Bathtub To Shower Conversion

Bathtub To Shower Conversion in Hammond, Georgia (GA)

Our Hammond crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Fulton County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
93,853
County
Fulton County
State
Georgia
Region
South
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Upgrading your bathroom setup stops dangerous slipping hazards and saves you time while cleaning up every single morning. Local homeowners in Fulton County can get a totally free price estimate right now to swap out that old acrylic tub for a massive walk-in bathing space.

Why Swapping Your Tub for a Walk-In Setup Makes Total Sense

First off, climbing over a high tub wall every morning gets real old real fast. Naturally, your balance isn't always great when you just woke up and your legs feel like jelly. Because of that, knocking down that high porcelain barrier stops nasty bathroom falls before they even happen. On top of that, you finally get to throw away that nasty, slimy shower curtain that keeps sticking to your back. Clean glass doors just look way better anyway.

Actually, scrubing old grout lines inside a deep basin destroys your back faster than working a double shift. Fortunately, modern wall surround panels stop soap scum from sticking to the corners. Which means you spend way less time on your hands and knees with a scrub brush. As a result, your weekend stays free for stuff you actually enjoy doing around Fulton County instead of cleaning chores.

Besides that, a open stall creates a huge cozy feeling even in a smaller home layout. Straight away, the whole room feels twice as big as it used to be. Honestly, you will wonder why you waited so many years to pull the trigger on this project. Furthermore, your daily routine gets a whole lot smoother when you can just walk right in without tripping over high tub edges.

Understanding the Real Work Behind a Basin Replacement

Starting out, the hardest part is ripping out that heavy old cast iron or fiberglass monster without smashing your drywall. Frankly, those old basins weigh a ton and love to fight back when you try to move them. Luckily, professional tools make short work of the removal process without wrecking your subfloor. Next up, the plumbing connections get moved around so your water drains out super fast without backing up.

After that, installing a rock-solid, low-profile base pan comes next in the process. Actually, if this base panel isn't completely level, water will sit in the corners and cause major mold issues down the line. To fix that, precise measurements ensure every single drop of water flows directly down the drain line. Above all, proper waterproofing behind the brand-new wall panels keeps your wood studs dry forever.

To top it off, you can customize your brand-new enclosure with awesome built-in features like corner caddies and sturdy grab bars. Realistically, having a safe spot to set your shampoo bottles makes a world of difference. Furthermore, non-slip textured floors give your feet total grip even when the water gets super soapy. Ultimately, you end up with a high-end wash area that feels super luxurious every single day.

Comparing Your Old Washing Setup to a Modern Stall

Check out how your current setup stacks up against a modern upgrade before you make up your mind.

Feature Old Soaking Tub Modern Walk-In Enclosure
Step-in Height High step over 15 to 20 inches Ultra-low step threshold under 4 inches
Cleaning Time Hours of back-breaking scrubbing Quick wipe down with a sponge
Bathroom Space Cramped and feels super small Open visual look with bright glass
Safety Factor High risk of slipping on wet enamel Textured floor pan for solid grip

Clearly, making the switch gives you way better functionality for your everyday home life. Consequently, you get a much safer washing space that also boosts your property value big time. Therefore, reaching out for a zero-cost estimate helps you see what fits your budget best.

Budgeting and Planning for Your Project in Fulton County

Money matters, so figuring out the overall investment helps you plan things out without stress. Look, every house around ZIP code 30291 has its own weird plumbing quirks under the floorboards. Naturally, older homes might need some quick pipe adjustments before setting down the new base pan. Nevertheless, getting an honest quote upfront keeps you from facing crazy surprise costs later on.

Luckily, local families living around these parts usually see great returns on home updates like this one. Since median household income here stays around $68,000, investing smartly in your house makes solid financial sense. Plus, staying in the home you love as you get older saves you tons of cash compared to moving away. Absolutely, peace of mind is worth every single penny when it comes to home safety.

Meanwhile, the whole construction process usually takes way less time than you might think. Usually, skilled workers can knock out the main tearing-down and building-up steps in just a couple of days. So, you won't have contractors tracking mud through your hallway for weeks on end. Moving forward, you get to enjoy a gorgeous wash space without endless construction headaches.

Upgrading Plumbing and Structural Supports

Underneath that old heavy basin lies a network of pipes that probably hasn't seen daylight in thirty years. Honestly, leaking copper pipes or old cracked PVC can rot out your subfloor real quiet-like. Straight away, replacing those hidden weak points prevents massive water damage down the line. Thus, your home structural framework stays bone dry and super solid for decades.

Furthermore, upgrading your drain size allows heavy showerhead water to flow out instantly without pooling at your feet. Remember, nobody likes standing in two inches of lukewarm dirty water while trying to get clean. Consequently, wider drain pipes keep everything flowing down fast and smooth. Beyond that, fresh pressure-balanced valves prevent burning hot water surges whenever someone flushes the toilet down the hall.

Selecting Wall Panels and Trim Elements

Choosing your new wall designs lets you bring out your total personal style without breaking the bank. For example, faux marble patterns give you that fancy hotel vibe without needing high-maintenance real stone care. That way, you get maximum style points with basically zero upkeep headaches over the years. Plus, color-matched trim pieces seal everything up tight so water never sneaks behind the walls.

Additionally, placing accessory shelves at the right height keeps your soap bars right where you need them. No more bending over and hurting your back just to pick up a dropped washcloth off the floor pan... Furthermore, integrated seating ledges offer a cozy spot to sit back and let the hot water hit your shoulders. Altogether, these small details turn a quick morning wash into a super relaxing break.

How Our Local Contracting Process Works for You

Working with local folks who know the area around Hammond, Georgia makes the entire remodeling project totally stress-free. First, a friendly contractor stops by your place to measure up your existing space and check your plumbing setups. Right then, you can chat about what you want without any crazy high-pressure sales pitches. Afterwards, you get an accurate written price breakdown that lays out all your options clearly.

When you are ready to move forward, our team handles all the heavy lifting and material hauling. Right away, floor protection guards go down so your carpets stay totally clean while we work inside your home. Subsequently, demo work happens fast, with all the old scrap metal and heavy porcelain hauled away immediately. Finally, clean installers test every single pipe fitting to ensure zero leaks before packing up their tools.

Ultimately, you get a beautiful space backed by solid craftsmanship from people who care about doing things right. Hence, you can relax knowing your wet space upgrade was handled by real hands-on pros. Indeed, taking the first step today gets you one step closer to the ultimate home upgrade. So, don't wait around until an old high tub wall causes an unnecessary fall inside your home.

Get Your Completely Free Project Estimate Right Away

Now is the absolute best time to transform your drafty old tub area into a spacious walk-in setup. Simply reach out to grab your non-binding project quote from a trusted local professional installer today. Above all, you deserve a safe and cozy washing space that looks totally awesome without costing an absolute fortune. Click now to lock in your free estimate and get your home project started off right!

Why the tub goes in Hammond

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Hammond

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Hammond

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Hammond

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Hammond

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Hammond repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Hammond

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Hammond in short

StandingIncorporated place
Population93,853

For the bigger map: county seat pages start at Fulton County; the statewide picture lives on Georgia; the wider region is the South; background reading sits on Wikipedia.

Bathrooms we convert around Hammond

Conversions booked across Georgia

One three-day job stands between this bathroom and its best fixture.

Get my free quote