Our Wilber crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Saline County within days.
Written quote at no cost, one callback, no chasing afterwards.
You probably face a daily struggle with that high, clunky wall of your old tub every single morning. That awkward step over the slippery edge is not just annoying but also quite dangerous. Fortunately, you can swap that outdated setup for a sleek, walk-in option that makes your morning routine feel like a breeze. By choosing this modern upgrade, you instantly create a safer, more open space that fits your lifestyle perfectly.
If you live in Saline County, you know how important a reliable, warm home setup is during those freezing Midwestern winters. Our small community of about 1,790 people deserves top-tier home improvements that do not drain your savings. This is why we focus on delivering top-notch, custom bathroom makeovers that replace your old basin with a spacious, low-profile stall. You will enjoy a much cleaner look and save yourself from future slips and falls.
This simple switch is actually the fastest way to make your bathroom feel twice as big without tearing down any major walls. Now, you can easily get a free project estimate to see how simple this change really is. We come right to your home, look at your current plumbing, and give you a straightforward price. Let us take a closer look at why this specific upgrade makes so much sense for your home.
Most homes built a few decades ago came with those standard, deep basins that nobody actually uses for soaking anymore. Since you probably only use it to stand in and spray off, the high walls are just getting in your way. By removing that heavy barrier, you open up the room and gain precious floor space. This means you get a much safer area to wash up without worrying about tripping on your way out.
On top of that, cleaning a flat, modern wall system is a million times easier than scrubbing old, stained porcelain. You will no longer have to bend over double to reach those annoying corners where mold loves to grow. Our updated acrylic wall systems resist grime and soap scum, which means you spend less time scrubbing on your hands and knees. You get to enjoy a sparkling clean space with just a quick wipe down every week.
Let us look at how these two setups compare so you can see the real daily benefits for your household.
| Feature | Old Deep Basin Setup | Modern Walk-In Stall |
|---|---|---|
| Step-In Height | High barrier (often 15 inches or more) | Low barrier (usually under 3 inches) |
| Cleaning Effort | Hard scrubbing of grout and deep corners | Quick wipe down on smooth surfaces |
| Space Utilization | Feels cramped and takes up physical room | Creates an open, airy visual appeal |
| Water Usage | Fills slowly and wastes gallons of water | Efficient drainage and direct flow |
As you can see, the practical benefits of making this change are pretty hard to ignore. Which means you save time, protect your joints, and give your home a beautiful new look. Our local team understands the needs of homeowners in the 68465 area, where the median household income sits around $51,908. We make sure every dollar you spend goes directly toward quality materials and expert labor that lasts for decades.
Many folks worry that a big bathroom project will turn their home into a dusty construction zone for weeks. However, our specialized team has perfected the art of the quick, clean tear-out and replacement. We start by carefully removing your old cast iron or steel basin without damaging your surrounding walls or floorboards. This lets us inspect the subfloor underneath for any hidden water damage or mold that needs fixing first.
Next, we update your old pipe connections to align perfectly with the new, low-profile drain location. This plumbing work is crucial because a fast-draining floor prevents water from pooling near your bathroom entry. After that, we install a sturdy, leak-proof base made from high-strength materials that will never crack under pressure. We then seal the walls with beautiful, waterproof panels that protect your home from moisture damage forever.
To give you a better idea of what to expect, here is a quick breakdown of our typical timeline.
First, we shut off the main water lines and protect your floors with heavy-duty drop cloths. Then, we carefully break down the old structure and haul away all the heavy debris so you do not have to lift a finger. This initial phase usually takes just a few hours of focused work.
After clearing the space, we position the new drain pipe and secure the heavy-duty slip-resistant base. This step ensures that your new setup drains perfectly every single time you rinse off. We test the flow thoroughly before moving on to the wall panels.
Finally, we mount the beautiful wall surrounds and install your chosen showerhead, mixing valves, and safety grab bars. We apply high-grade silicone sealant to every single joint to guarantee a completely watertight finish. Once the seal cures, your brand-new, modern wash space is ready for action.
When you design your new walk-in space, you get to choose features that make your life much easier. For instance, you can add built-in corner shelves to keep your shampoos and soaps organized and off the floor. This keeps your space looking tidy and prevents you from slipping on a stray bottle of body wash. You can also choose comfortable built-in seating if you prefer to sit down while washing your hair.
Safety is another huge reason why local families decide to make this smart investment for their homes. Adding sturdy grab bars that match your hardware gives you something solid to hold onto when stepping in or out. These bars do not look like hospital equipment anymore; they blend in beautifully with modern, stylish designs. This means you get peace of mind without sacrificing the overall look of your renovated space.
On top of that, we offer various texture options for the floor pan to ensure excellent traction underfoot. This slip-resistant texture works incredibly well even when the surface is covered in soapy water. You can confidently step into your morning routine without any fear of losing your footing. It is all about creating a relaxed, worry-free environment where you can truly refresh yourself.
We take pride in serving our neighbors in this historic Czech Capital of Nebraska with honest, reliable craftsmanship. Because we are a local business, we treat your home with the exact same respect we would show our own families. We know that home improvement projects can feel overwhelming, so we explain every detail of the job beforehand. You will never have to worry about hidden fees or sudden price hikes when the work is finished.
Our team brings all the right tools, skills, and experience directly to your doorstep to get the job done right the first time. We work quickly to minimize any disruption to your daily life, often completing the entire swap in just a couple of days. This means you do not have to live without a working bathroom for weeks on end. We clean up every speck of dust before we leave, leaving you with nothing but a beautiful new space to enjoy.
If you are ready to say goodbye to that old, clunky tub, we are here to make the transition incredibly easy. By requesting a free project estimate, you can explore all the design possibilities and get an honest, upfront price. We will walk through your bathroom, listen to your ideas, and help you choose the perfect setup for your budget. Contact us today to schedule your visit and take the first step toward a safer, more beautiful home!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Wilber repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Saline County; the statewide picture lives on Nebraska; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote