Our Watertown crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Litchfield County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you are tired of stepping over that high, dangerous ledge every single morning just to get washed. This daily struggle can make your start of the day feel like a real chore. Happily, a quick update can completely change how your space functions and keep you safe from nasty slips.
Naturally, swapping your old deep basin for a sleek, low-profile entry point makes your daily routine feel incredibly smooth and fast. You will save valuable time because cleaning a flat floor is much easier than scrubbing deep, curved porcelain walls. Our local team comes right to your home to inspect the setup and give you a free estimate on making this smart swap.
Additionally, modernizing this area of your home boosts the overall value of your property while giving the room a much cleaner, spacious look. People who buy homes these days actually prefer a spacious stall over a dusty basin they never use to soak. This simple change is not just about looks, it is also a huge upgrade for your peace of mind.
To begin with, safety is the main reason why homeowners decide to tackle this specific home improvement project. Think about how many times you have slipped slightly while trying to balance on one wet foot. Replacing that old tub with an open, slip-resistant base eliminates that daily hazard instantly.
Besides that major safety boost, you will love how much larger your small bathroom suddenly feels. Traditional basins consume a massive amount of physical floor space and create visual blocks that make rooms feel like tiny closets. Installing a low-barrier pan with glass doors lets light flow freely and opens up the entire room.
Indeed, the functional advantages of this swap are hard to ignore when you think about your daily chores. You do not have to bend down at awkward angles to clean hard-to-reach corners anymore. Here is a quick comparison to show you how your life gets easier after the change:
| Old Setup Features | New Walk-In Benefits |
|---|---|
| High 15-inch step-over ledge | Low-profile entry under three inches |
| Hard-to-clean curved corners | Flat, non-porous acrylic walls | Slip-resistant textured base flooring |
First, we start by carefully protecting your flooring and hallway before we touch any tools. Our crew takes great pride in keeping your home spotless while we work. Then, we carefully extract the old heavy cast-iron or steel fixture without damaging the surrounding drywall.
Consequently, this exposes the hidden plumbing lines so we can inspect them for any old leaks or water damage. We replace outdated pipes with strong, modern materials to prevent any future headaches behind your new walls. This step is crucial because you want your new setup to last for decades without a single issue.
After that, we install the new heavy-duty acrylic pan and hook up the drain lines perfectly. We finish the space with beautiful, waterproof wall panels that look exactly like real tile but require zero grout scrubbing. Finally, we can add handy extras like heavy-duty grab bars, corner shelves, or a comfortable built-in bench seat.
To give you the perfect look, we offer a massive variety of wall patterns and hardware finishes to match your existing fixtures. You can choose from modern matte black faucets, classic brushed nickel, or shiny chrome showerheads. These choices allow you to design a space that feels uniquely yours.
Furthermore, you get to decide on the type of enclosure that best fits your lifestyle. Some folks love a sleek, frameless glass door that slides open effortlessly. Others prefer a simple, open-concept walk-in style with no doors at all for the ultimate barrier-free experience.
Fortunately, our highly trained installers usually complete the entire physical transformation in just a couple of days. You do not have to deal with weeks of construction dust, loud noise, and contractors tracking mud through your living room. We work fast and clean up every single piece of debris before we leave.
On top of that, we make sure everything is completely sealed with commercial-grade silicone to prevent any moisture from getting behind your walls. We test the water pressure and drainage thoroughly before we consider the job done. This means you can use your gorgeous new space almost immediately after we pack up our tools.
If you live in this beautiful part of Connecticut, you know how charming the historic homes around here are. However, those older homes often come with tiny, outdated bathrooms that do not fit our busy, modern lives. We specialize in updating these classic spaces while respecting the original structure of your home.
Actually, many of your neighbors in the 06795 ZIP code area have already made this transition to improve their home accessibility. Whether you live near the bustling town center or up in the quiet hills, we are ready to drive right to your door. We understand the local building codes and make sure every permit is handled correctly.
With a local population of 3,324 residents, we treat every customer like a true neighbor because you probably are one. Our community has a solid median household income of $67,121, which means local homeowners appreciate quality work that increases their home equity. We deliver top-tier craftsmanship that fits your budget perfectly without any hidden fees.
Now, the best way to start this exciting project is by scheduling a visit for a completely free price estimate. We will sit down with you, look at your current bathroom layout, and discuss all the beautiful design options available. You get a detailed, written price quote with absolutely zero pressure to buy.
This allows you to make an informed decision without feeling rushed or stressed about the cost. We believe in honest pricing and clear communication from the very first quick message. Let us help you turn that old, unused soaking tub into a bright, safe, and beautiful daily oasis that you will actually enjoy using every single day.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Watertown repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Litchfield County; the statewide picture lives on Connecticut; the wider region is the Northeast; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote