Across Wallace County, bathtubs that retired years ago give way to showers built in their own footprint.
Written quote at no cost, one callback, no chasing afterwards.
Are you tired of stepping over a high wall just to wash up every morning? Well, swapping that bulky old tub for a sleek walk-in shower changes your daily routine completely.
Now, this major bathroom upgrade gives you a safer and much easier way to shower without any trouble. Therefore, many homeowners choose this project to make their homes much more practical for aging in place.
Old porcelain basins often take up too much precious room in smaller bathrooms. This means you lose valuable space that could serve you much better.
Eventually, scrubbing those stubborn stains around the drain becomes a massive weekend chore. Instead, trading that massive basin for a modern walk-in unit saves you hours of cleaning time.
High walls create a dangerous tripping hazard for anyone with bad knees or sore hips. Consequently, removing that barrier lets you step inside smoothly and prevents painful slips.
Plus, adding built-in grab bars gives you extra stability while you wash your hair. This smart addition keeps your family safe and gives you total peace of mind every single day.
Planning this kind of project requires you to look at your current plumbing setup very carefully. Afterwards, you can figure out if your drain lines match the needs of a brand-new basin.
Sometimes, older homes in the region need pipe adjustments before the installation crew starts working. This guarantees your new setup drains properly and prevents leaks behind the drywall.
Acrylic wall surrounds keep moisture away from your wood framing and stop mold growth dead in its tracks. Thus, your bathroom stays fresh and healthy year-round.
Glass doors make the entire room feel bigger by letting natural light bounce around freely. Furthermore, these clear panels give your bathing area a touch of pure luxury and sophistication.
Hiring a skilled local contractor makes the entire renovation process go by smoothly from start to finish. They bring the right tools and years of hands-on experience to your front door.
Meanwhile, you can sit back and relax while the crew handles all the heavy lifting. This lets you avoid messy mistakes and saves you from costly do-it-yourself disasters.
First, the installation crew removes your old porcelain tub and hauls it away from your property. Then, they inspect the subfloor for any hidden water damage or wood rot.
Next, they waterproof the walls and install the new shower pan to catch all the running water. This crucial step protects your house foundation from expensive moisture issues down the road.
Most standard projects take only a few days from the initial demo to the final silicone bead. Because of this fast turnaround, you will not have to live in a construction zone for months.
Soon enough, you can enjoy your gorgeous new washing space without any major disruptions to your schedule. That speed makes the whole investment totally worth it for busy families.
Prices vary depending on the specific fixtures and tile choices you select for your new layout. However, investing in quality materials ensures your investment lasts for many decades.
Additionally, upgrading your bathroom increases your home market value significantly if you ever decide to sell. Buyers love seeing modern washing facilities that look amazing and function perfectly.
A professional contractor visits your home to measure the exact dimensions of your current bathroom setup. During this visit, you can discuss your design preferences and budget requirements openly.
Following that discussion, you receive a detailed breakdown of all the expected labor and material expenses. This transparency helps you make an informed decision without feeling any sales pressure.
You deserve an upfront price tag before any contractor swings a hammer in your house. Therefore, requesting a zero-cost quote lets you plan your finances without any hidden surprises.
Simply reach out to schedule your consultation and take the first step toward your dream bathroom today. Your customized estimate arrives quickly so you can start planning your remodel right away.
Standard tubs trap water and make daily washing feel like a cramped athletic event. Conversely, low-profile shower pans give you maximum floor space and effortless entry.
Below is a quick comparison table to help you understand the main design differences:
| Feature | Old Bathtub | New Walk-In Shower |
|---|---|---|
| Entry Height | High wall (14 to 20 inches) | Flush or very low threshold |
| Cleaning Effort | High (lots of surface area) | Low (smooth seamless panels) |
| Safety Level | Moderate risk of slips | High stability with safety bars |
Reviewing these differences shows why so many homeowners in the area prefer modern shower enclosures. Such improvements modernize your home and elevate your daily comfort.
Personalizing your washing area allows you to match your existing interior design aesthetic seamlessly. You can choose from various finishes like brushed nickel, matte black, or polished chrome.
Furthermore, adding built-in soap niches keeps your shampoo bottles organized and off the floor. These thoughtful touches make your daily routine feel like a spa visit.
Proper upkeep ensures your brand-new enclosure stays sparkling clean for many years to come. Wiping down the glass walls with a squeegee after each use prevents soap scum buildup.
Besides that, using mild cleaning products protects the acrylic surfaces from harsh chemical scratches. This easy maintenance routine saves you time and keeps your bathroom looking pristine.
Modernizing outdated wet areas makes your property much more attractive to future home buyers. This upgrade provides a high return on investment when you list your house on the market.
Ultimately, trading your old basin for a sleek shower transforms your daily living experience entirely. Take action right now by requesting your free quote to get started on your home improvement journey.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
One three-day job stands between this bathroom and its best fixture.
Get my free quote