Bathtub To Shower Conversion

Bathtub To Shower Conversion in Viroqua, Wisconsin (WI)

Our Viroqua crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Vernon County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
4,371
County
Vernon County
State
Wisconsin
Region
Midwest
Median income
$37,917
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Tired of climbing over that high wall just to wash up?

Daily routines should feel smooth and easy instead of resembling an obstacle course in your own home. Many people in our lovely Vernon County area struggle with outdated wash basins that take up way too much space and pose serious tripping hazards. By swapping that bulky old basin for a modern walk-in stall, you instantly create a safer, more open space that fits your busy life perfectly.

Our dedicated local team specializes in transforming these cramped wash areas into beautiful, accessible walk-in spaces. We come right to your home to look at your layout and give you a detailed, honest assessment without charging you a single dime for the visit. You can easily grab a free estimate today to see how simple this upgrade really is.

Why swapping your old basin makes perfect sense

Think about how much easier your mornings will be when you can just step into a spacious stall. Old basins require you to lift your legs high over a slippery ledge, which gets harder and more dangerous as the years roll by. When you replace that giant tub with a low-threshold basin, you dramatically reduce the risk of slips and falls in the wet area.

Besides the safety aspect, a fresh walk-in stall gives you a lot more physical room to move around. Standard layouts often feel claustrophobic because of the high walls enclosing the bathing space. This simple swap opens up the entire room, making the whole layout look bigger and brighter without moving a single wall.

On top of that, busy people rarely have the time to sit and soak for hours anyway. Most of us just want a quick, hot spray to get clean and feel refreshed. Modernizing this area aligns your home with your actual daily habits, saving you precious time and making cleaning a total breeze.

Let us look at a quick comparison to see how these two setups stack up against each other:

Feature Old High-Wall Basin Modern Walk-In Stall
Step-in Height Usually 14 to 18 inches high Often under 3 inches or completely flat
Required Maintenance Hard scrubbing of deep corners Quick wipe down on flat surfaces
Physical Space Feels cramped and enclosed Feels open, airy, and spacious
Safety Level High risk of slipping while stepping over Very safe with easy entry and exit

What goes into this bathing area transformation?

The entire process is actually much faster and less messy than you might expect. First, our crew carefully removes the old cast iron or acrylic basin without damaging your surrounding walls or floorboards. This requires a lot of muscle and some clever techniques, but we handle all the heavy lifting so you do not have to stress.

After we clear out the old unit, we inspect the underlying wood and plumbing for any hidden water damage. Since older homes in the 54665 zip code area often have hidden leaks behind the walls, we make sure everything is completely dry and structurally sound before we proceed. This attention to detail protects your home from mold and rot down the road.

Next, we install a high-quality, slip-resistant pan and connect it to your existing drain system. We then seal the walls with beautiful, water-resistant panels or custom tile work that matches your personal taste. This creates a watertight seal that keeps moisture where it belongs and adds a massive touch of coziness to your daily routine.

Customizing your new walk-in stall

You can choose from a wide variety of features to make the space uniquely yours. Many homeowners opt for built-in seating, sturdy grab bars, and recessed shelves to hold all their soaps and shampoos. These little details turn a simple daily chore into a luxurious experience that you will actually look forward to every day.

Another popular option is a handheld spray nozzle that lets you direct the water exactly where you need it. This makes washing up much easier for folks with limited mobility and also simplifies cleaning the walls. We can explain all these custom options during your initial home visit.

The financial side of upgrading your washroom

Investing in your home is a big decision, especially when you consider the local median household income of $37,917. Because we live and work in this beautiful community of 4,371 people, we strive to keep our prices fair and transparent. We work hard to find options that fit your budget while still delivering top-tier craftsmanship.

A smart upgrade like this can actually boost your property value if you ever decide to sell. Buyers absolutely love modern, accessible wash areas because they know they will not have to do the remodeling work themselves. This means you get to enjoy a safer washroom now while building equity for the future.

To help you plan, we provide a complete breakdown of all material and labor costs upfront. You will never have to worry about hidden fees or surprise charges when the job is done. We believe in honest business practices and treat every single client like our neighbor.

What about the disruption to your home?

We understand that having workers in your house can feel a bit intrusive. That is why our team works quickly and efficiently to finish the job in just a couple of days. We protect your floors with drop cloths and clean up every speck of dust before we pack up our tools.

Our goal is to leave your home cleaner than we found it, with nothing left behind except a gorgeous new wash area. You can count on us to respect your schedule and keep noise to an absolute minimum. We want this experience to be as stress-free as possible for you.

Getting started with your home upgrade

Taking the first step is incredibly easy and does not cost you a thing. We will gladly drive out to your property, examine your current setup, and chat about what you want to achieve. This face-to-face meeting ensures we understand your goals and can give you an accurate price quote.

We take pride in helping our neighbors live more comfortably and safely in their homes. Whether you live right in the heart of Viroqua, Wisconsin, or in the surrounding countryside, we are ready to assist you. Let us help you turn that old, unused soaking tub into a beautiful, functional walk-in space today.

Do not wait until a slippery slip or a fall forces you to make a change. Contact us today to schedule your completely free, no-obligation consultation with our friendly local crew. We will answer all your questions and help you design the perfect setup for your lifestyle.

Why the tub goes in Viroqua

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Viroqua

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Viroqua

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Viroqua

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Viroqua

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Viroqua repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Viroqua

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Viroqua in short

StandingIncorporated place
Population4,371
ZIP codes54665
Land area4.5 sq mi
Density967 per sq mi
Median income$37,917

For the bigger map: county seat pages start at Vernon County; the statewide picture lives on Wisconsin; the wider region is the Midwest; background reading sits on Wikipedia.

Bathrooms we convert around Viroqua

Conversions booked across Wisconsin

One three-day job stands between this bathroom and its best fixture.

Get my free quote