Our Union Valley crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Kaufman County within days.
Written quote at no cost, one callback, no chasing afterwards.
Getting into your daily wash routine should not feel like an Olympic hurdle event every single morning. Many of us have those old, deep basins that just sit there collecting dust and taking up half the bathroom space. Honestly, when was the last time you actually took a soak instead of just rushing through a quick spray?
By swapping that clunky, outdated tub for a modern, walk-in stall, you instantly open up your room and make your daily routine ten times easier. This smart upgrade maximizes your floor layout while giving you a bright, open space that feels way less cramped. Our team travels right to your home in Kaufman County to look at your setup and give you a complete, free estimate on the spot.
This layout change does more than just update your style. It also keeps you safe from nasty slips on wet porcelain. Let us look at why this change makes so much sense for your home.
If you think about it, traditional deep basins pose a real tripping hazard for kids and older folks alike. By lowering the entry step to just a few inches, you create a much safer environment for everyone in the house. This lets you wash up with peace of mind, knowing you will not lose your balance while climbing out.
On top of that, cleaning a flat, modern wall system is a breeze compared to scrubbing old grout lines and stained porcelain curves. You will spend less time on your knees with harsh chemicals and more time enjoying your beautiful home. Our premium materials resist mold and grime, which means your new setup stays sparkling clean with just a quick wipe down.
To help you see the difference, here is a quick look at how these two setups compare in daily life:
| Feature | Old High-Walled Tub | Modern Walk-In Setup |
|---|---|---|
| Entry Height | Usually 15 to 18 inches | Only 3 to 5 inches |
| Cleaning Effort | High scrubbing, lots of moldy grout | Low maintenance, non-porous walls |
| Floor Space Feeling | Cramped and bulky | Open, bright, and airy |
Which means you get a safer, cleaner, and more beautiful room without any of the old hassles. This simple swap completely changes how you feel about your morning routine.
First, we sit down with you to look at your existing plumbing lines and talk about your style preferences. This lets you choose the perfect wall patterns, fixtures, and built-in shelving that fit your personal taste. We make sure every shelf and grab bar sits exactly where you need it for maximum convenience.
Because we customize everything, you do not have to worry about weird gaps or sloppy edges around your new stall. We measure your space down to the millimeter so that the new pan fits snugly against your existing walls. This precise fit prevents leaks down the road and ensures a flawless finish.
Next comes the heavy lifting, where we carefully remove your old basin without damaging your surrounding walls or flooring. This can be a messy job, but our crew treats your home like our own by cleaning up every bit of debris. We haul away the old junk so you do not have to deal with it.
Once the old unit is out, we inspect the subfloor and the pipes underneath to ensure everything is dry and structurally sound. Fixing any hidden water damage now saves you from massive headaches and expensive repairs in the future. We only build on top of a rock-solid foundation.
Choosing your new fixtures is where the real fun begins. You can opt for a luxury rainfall showerhead, a handy handheld sprayer, or even multiple body jets for a spa-like feel. This lets you customize your water pressure and direction to melt away the stress of a long day.
Do not forget about the seating options and safety accessories either. Adding a built-in bench or a fold-down seat gives you a comfortable spot to relax while you wash. These small details transform a simple daily chore into a truly pleasant experience.
To give you some ideas, here are some popular features our customers love to add:
| Feature Option | Concrete Benefit for You |
|---|---|
| Low-Barrier Threshold | Easy access with almost zero trip risk |
| Built-In Corner Caddies | Keeps all your shampoos organized and off the floor |
| Slip-Resistant Textured Floor | Gives your feet a firm grip even when soapy |
Which means you can build a space that works perfectly for your body and your budget. You do not have to settle for a cookie-cutter bathroom anymore.
Living in a cozy community of about 367 people means that word of mouth is everything to us. Since the median household income here sits around $96,563, we know that local families value high-quality work that actually lasts. We do not cut corners because we want you to love your home for decades to come.
Whether you live near the quiet country roads of Union Valley, Texas, or closer to the county lines, we are just a quick drive away. We understand the specific soil shifts and plumbing quirks common to homes in the 75189 area. This local knowledge helps us prevent plumbing issues that out-of-town contractors might completely miss.
Now is the perfect time to upgrade your home value with a smart, beautiful bathroom remodel. We handle all the permits and heavy lifting so you can just sit back and watch the magic happen.
Are you ready to say goodbye to that old, dusty tub once and for all? Getting started is incredibly simple and will not cost you a single penny up front. We will drive right out to your house, look over your bathroom, and give you a detailed, written quote completely free of charge.
This lets you plan your budget without any hidden fees, surprises, or pushy sales tactics. We believe in honest, upfront pricing and friendly service from start to finish. Reach out today to schedule your free consultation and take the first step toward the bathroom of your dreams!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Union Valley repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Kaufman County; the statewide picture lives on Texas; the wider region is the South; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote