Our Tyhee crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Bannock County within days.
Written quote at no cost, one callback, no chasing afterwards.
Thinking about ditching that massive porcelain basin that takes up half your bathroom? Transforming that awkward, high-walled water tank into a sleek, walk-in aquatic stall is the smartest move you can make for your home in Bannock County.
This upgrade gives you extra floor space and makes getting ready in the morning much safer. You can finally stop performing gymnastics just to climb over a slippery ledge every single day.
Perhaps you are tired of scrubbing those deep corners where soap scum loves to hide and build up. Switching to a low-entry stall lets you wipe down glass panels in seconds instead of fighting with a curtain.
Most folks living in this part of Idaho, where the median household income hovers around $84,526, find that modernizing their plumbing features adds serious value. Your property becomes much more attractive to future buyers who want a clean, modern look.
You gain a sense of ease that makes your morning routine feel like a breeze. Instead of feeling cramped, you get a wide area to move around without bumping your elbows.
Maybe you worry about the structural changes required for such a big renovation project. It is actually quite straightforward when you bring in someone who knows how to handle the sub-floor and the drain adjustments properly.
This process involves pulling out the bulky hardware and replacing it with a custom pan that fits perfectly into the existing footprint. You get to choose the tile, the fixtures, and the glass doors that match your style perfectly.
Everything fits together tighter, which stops water from leaking onto your floor tiles. That means you spend less time mopping and more time enjoying your day.
Considering the risk of slips and falls is something every smart homeowner should prioritize today. High walls pose a constant threat, especially if you ever have guests or older relatives coming to visit.
A flat entry threshold removes that barrier completely so you can walk right in without lifting your feet high. This creates a state of total peace of mind for everyone who uses the room.
Adding grab bars or a built-in seat makes the space even more secure for years to come. You will love how much more relaxed you feel when you do not have to worry about losing your footing.
First, the team arrives to measure your specific area and check the pipes hidden underneath. They make sure the drain location matches the new design requirements for proper flow.
Next, they remove the old tub and dispose of it so you do not have to deal with the junk. This step is usually done in a single day so your house stays tidy.
Then, they install the new base and seal it up tight to prevent any moisture damage. Finally, you get to pick out the finishing touches like brushed nickel handles or fancy shower heads.
| Feature | Your Benefit | |
|---|---|---|
| Low entry threshold | Prevents tripping and makes access simple | |
| Minimalist glass design | Creates a feeling of roominess and openness | |
| Non-slip floor finish | Adds a layer of safety during every wash | |
| Custom wall panels | Saves you from constant grout cleaning |
Whether your home is tucked away near the local ZIP codes or situated on a quiet street, this project respects the character of your building. You live in a place where people appreciate quality work that lasts for a long time.
Investing in these changes is a great way to boost your own satisfaction with your living environment. You deserve a space that reflects your needs rather than the outdated trends of the past.
Everything is tailored to fit the exact dimensions of your current room. You get a perfect fit that looks like it was always meant to be there from the start.
Maybe you feel nervous about the plumbing side of things because of past bad luck. You should know that modern kits are built to be leak-proof and durable for many decades.
The drain conversion is the most important part because it dictates how fast water leaves the floor. A high-quality installation ensures you never stand in a pool of water while trying to rinse off.
On top of that, new wall systems use specialized backing boards that resist mold growth effectively. This keeps your home environment healthy and smelling fresh without needing harsh chemicals.
Waiting around will not fix the issue of a clunky, outdated piece of hardware in your room. Asking for a free quote lets you see exactly what is possible within your budget right now.
You gain clarity on the timeline and the materials available for your specific project. There is no pressure, just a clear plan of action to help you decide your next steps.
Think about how much more you will enjoy your mornings once this change is complete. You will wonder why you waited so long to make the switch to a better setup.
You likely want a space that feels like a calm retreat after a long day at work. Replacing a tub with a beautiful stall creates that sense of harmony you crave.
It is not just about looks because functionality matters just as much in the long run. You get a space that works for you, not against you, every single day.
Everything comes down to how you want to spend your precious time at home. Removing the frustration of an old tub allows you to focus on the things that actually matter.
You might be living in a smaller town like the one where 1,266 people call home, but that does not mean you sacrifice quality. Every single home deserves an upgrade that makes life feel a bit smoother.
Taking action now puts you ahead of the curve and clears the path for a beautiful update. You get the comfort of knowing the job is done by someone who cares about your satisfaction.
Reach out to get your free estimate and start planning your new, improved wash area. You will be glad you did the moment you step into your new, open space for the very first time.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Tyhee repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Bannock County; the statewide picture lives on Idaho; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote