Bathtub To Shower Conversion

Bathtub To Shower Conversion in Shawnee County, Kansas (KS)

Across Shawnee County, bathtubs that retired years ago give way to showers built in their own footprint.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Ditch the Old Tub for a Modern Walk-In Experience

If you struggle to climb over that high porcelain barrier every single day, you are probably ready to upgrade your bathroom experience. This smart home modification replaces your clunky basin with a spacious, low-profile washing area that fits your lifestyle perfectly.

Indeed, making this change instantly turns a cramped bathroom into an open oasis. You get rid of the mold-prone sliding glass doors and the yellowed acrylic walls that belong in a bygone decade. This lets you enjoy a clean, safe, and contemporary space that feels twice as big as before.

Because safety matters just as much as style, removing that tripping hazard reduces the risk of slips. Which means your family can wash up with total peace of mind every single day. On top of that, a flat entry makes the daily routine effortless for anyone with limited mobility.

Why Homeowners Are Swapping Their Deep Basins

Let us be completely honest about how often you actually take a soaking bath. Most of us just stand in there with a plastic curtain clinging to our backs. This upgrade gives you actual elbow room so you do not feel trapped in a plastic tube.

Naturally, cleaning a flat floor is ten times easier than scrubbing a stained curved bottom. You will no longer need to bend over and hurt your back just to bleach those stubborn corners. That alone makes the whole process worth every single penny.

Besides the obvious physical relief, this upgrade adds serious value to your property. Many buyers today look for modern, accessible stalls rather than outdated porcelain basins they will have to demolish anyway. This simple swap positions your home as a move-in ready treasure on the local market.

What to Expect During Your Project

When you decide to take the plunge, you might worry about your home turning into a dusty construction zone for weeks. However, our crew works incredibly fast to tear out the old cast iron or fiberglass monster with minimal disruption. We protect your floors, seal off the work area, and clean up every speck of drywall dust before we leave.

To give you a better idea of what goes into this process, we have broken down the typical steps involved in the transition.

Project Phase What We Do Benefit to You
Demolition & Removal We carefully extract the old basin, wall tiles, and plumbing. Clears the space without damaging your existing framing.
Plumbing Realignment We move the drain and install modern valves and showerheads. Prevents leaks and ensures optimal water pressure.
Pan & Wall Installation We fit the new low-threshold base and waterproof surround. Creates a seamless, water-tight seal that resists mold.
Fixtures & Clean-up We add your chosen hardware, grab bars, and tidy the room. Leaves you with a gorgeous, functional space ready for use.

Now, you can see that the entire transformation is highly organized. This structured approach means you will not have to deal with unexpected delays or endless messes. Which means you can get back to your normal routine in just a matter of days.

Choosing the Right Materials for Durability

Some people worry that plastic wall surrounds look cheap or flimsy. Fortunately, modern acrylic and composite materials mimic the gorgeous look of natural stone or subway tile without the annoying maintenance. This lets you achieve a high-end look without spending hours scrubbing dirty grout lines.

If you prefer a classic style, you can opt for custom tiling on a solid waterproof backer board. Although this option takes a bit longer to install, it allows for total customization of your design. You can mix and match colors, add built-in shampoo niches, or even create a beautiful mosaic accent strip.

For those prioritizing ultimate safety, slip-resistant textured pans are absolute lifesavers. These specialized bases offer incredible traction even when soapy water covers the surface. This crucial feature helps prevent dangerous falls for children and seniors alike.

Custom Features That Maximize Convenience

Imagine stepping into a space designed specifically for your daily routine. By adding a built-in bench or a fold-down seat, you can relax under the warm water without standing the entire time. This simple addition transforms a quick rinse into a soothing spa-like ritual.

Additionally, we can install adjustable slide bars for your handheld sprayer. This lets you position the water stream at the perfect height, whether you are sitting down or standing tall. It also makes washing pets or cleaning the walls incredibly simple.

To keep your soaps and shampoos organized, we offer recessed shelving that blends into the wall. This keeps your bottles off the floor and out of your way. Which means your space stays tidy and free of clutter without needing ugly plastic caddies.

Your Local Upgrading Experts in Kansas

We proudly serve homeowners throughout the heart of Shawnee County, Kansas, bringing top-tier craftsmanship to every neighborhood. Our local crew understands the unique plumbing challenges found in both historic homes and modern builds across the region. We handle every permit and code requirement so you do not have to worry about a thing.

Because we live and work in this beautiful community, we treat your home with the utmost respect. We know that home improvement is a major decision, which is why we offer honest advice and transparent pricing. You can trust us to deliver exceptional results that stand the test of time.

Whether you live in a cozy suburban ranch or a spacious historic property, we have the skills to transform your bathroom. We customize every detail to match the architectural style of your home. This ensures your new setup looks like it was always meant to be there.

Get Your Free Estimate Today

Perhaps you are wondering about the total cost of swapping out your old bath. We make it easy to plan your budget by offering a completely free on-site consultation. Our friendly estimator will look at your current layout, discuss your ideas, and provide an accurate quote with zero obligation.

This lets you explore all the design possibilities without any high-pressure sales tactics. We believe in letting our quality work and competitive prices speak for themselves. You can ask us all your burning questions and discover how affordable this upgrade can actually be.

Do not spend another day climbing over that awkward, slippery ledge. Contact us right now to schedule your free estimate and take the first step toward a safer, more beautiful home. We look forward to helping you create the perfect washing space you deserve!

Why the tub goes

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Shawnee County

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Tub-to-shower stops across Shawnee County

Working outward through Kansas

One three-day job stands between this bathroom and its best fixture.

Get my free quote