Our Roper crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Washington County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high, dangerous wall every single morning just to get washed.
Honestly, many homeowners find themselves trapped with an outdated, deep basin they never actually use for soaking.
This is why trading that old clunky tub for a modern, walk-in washing space makes total sense for your daily routine.
Fortunately, our local team specializes in making this exact swap quick and completely stress-free.
Imagine stepping into a spacious, open area without tripping or slipping on slick porcelain.
By requesting a free quote today, you can start planning a layout that fits your routine perfectly.
When you make this change, you instantly gain a safer and much more open bathroom.
Naturally, we come right to your home to look at your plumbing and give you a clear estimate.
Which means you get honest pricing without any sneaky hidden fees down the line.
Let us face the facts about how we actually use our bathrooms today.
Most of us simply do not have the time for long, drawn-out baths anymore.
Instead, we want a fast, refreshing wash that gets us ready for the day ahead.
Choosing to install a modern walk-in enclosure instead of a dusty basin saves you precious space.
On top of that, it drastically cuts down on the time you spend scrubbing stubborn soap scum.
Newer acrylic and tile materials resist grime much better than old cast iron fixtures.
This simple upgrade also prevents dangerous slips, which is super important as we get older.
Because of this, your family gets peace of mind every time they step in to wash.
We focus on installing low-profile thresholds that keep the water in and the danger out.
You might worry that remodeling your bathroom will turn your home into a dusty disaster zone for weeks.
Actually, our crew works incredibly fast to tear out the old unit and prep the drain.
We handle the heavy lifting, the plumbing adjustments, and the clean-up so you do not have to lift a finger.
First, we carefully measure your existing alcove to ensure the new base fits like a glove.
Then, we update the pipe connections to match the new central drain location perfectly.
This prevents leaks and ensures your wastewater flows away quickly without backing up.
After that, we install beautiful, water-tight wall panels or custom tile that match your personal style.
Which means you get a fresh, modern look that feels like a fancy hotel spa.
Our high-school level budget planning keeps the project affordable while delivering top-tier durability.
| Feature | Old Deep Basin | Modern Walk-In Setup |
|---|---|---|
| Step-In Height | High (14-18 inches) | Low (1-3 inches) |
| Cleaning Effort | High (lots of bending) | Low (easy wipe-down) |
| Floor Space | Feels cramped and bulky | Feels open and spacious |
Every home has a unique vibe, so your new washing area should reflect your personal taste.
You can choose from slick glass doors, simple rods, or even a completely open wet-room design.
These choices let you customize the layout to match your physical needs and aesthetic desires.
Adding built-in seating or sturdy grab bars is another smart move for long-term comfort.
This lets you relax while you wash, making the experience feel incredibly luxurious and safe.
We also install recessed caddies to keep your shampoos and soaps organized and off the floor.
Think about how much better your morning will go when everything is exactly where you want it.
Since we customize every project, you get to pick the colors, fixtures, and textures yourself.
Our job is simply to bring your vision to life while keeping the plumbing 100% up to code.
Living in Washington County means appreciating the quiet beauty of a historic, tight-knit community.
With a local population of just 646 people, neighbors around here really value quality craftsmanship and honest work.
We love helping folks in the 27970 area code upgrade their homes with durable, long-lasting renovations.
Since the median household income in Roper, North Carolina sits around $14,671, we know budget matters.
That is why we focus on cost-effective remodeling solutions that offer the biggest bang for your buck.
We never push unnecessary extras, focusing instead on what actually improves your daily life.
Upgrading your fixtures can also boost the overall value of your property if you ever decide to sell.
Most modern buyers actively look for homes that already have updated, accessible master bathrooms.
By making the switch now, you enjoy the benefits today and secure a better return on your investment tomorrow.
Nobody wants to spend their weekends scrubbing moldy grout lines with a toothbrush.
Selecting high-quality solid surfaces or non-porous acrylics keeps your maintenance tasks to an absolute minimum.
These modern materials do not crack, chip, or discolor over time like old fiberglass models do.
If you prefer a classic look, custom tile offers endless design possibilities and unmatched strength.
However, it does require professional sealing to keep the moisture from sneaking behind the walls.
We talk you through the pros and cons of each material so you make the best choice for your lifestyle.
Whichever route you choose, our team ensures the waterproofing underneath is completely bulletproof.
This protects your subfloor from rot and keeps your home structurally sound for decades to come.
We take pride in doing the invisible work right, because that is what keeps your home safe.
Stop struggling with a bathroom layout that no longer works for you or your family.
Our friendly local team is ready to visit your home, inspect your space, and offer expert advice.
We provide a detailed, no-obligation quote so you can see exactly how affordable this change can be.
Simply reach out to us to schedule your convenient, face-to-face consultation.
We will answer all your questions, show you material samples, and help you design your dream setup.
Let us help you transform your daily routine into something truly enjoyable and safe!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Roper repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Washington County; the statewide picture lives on North Carolina; the wider region is the South; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote