Our Rocky Boy's Agency crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Hill County within days.
Written quote at no cost, one callback, no chasing afterwards.
Getting stuck climbing over a high porcelain barrier every single morning gets old really fast. You deserve a modern walk-in bathing space that fits your busy lifestyle. Our team comes right to your home in Hill County to help you plan this awesome bathroom upgrade.
By swapping out that old unused tub for a spacious walk-in stall, you instantly make your bathroom feel twice as big. This smart change prevents nasty slips on wet porcelain. We specialize in making this switch quick and painless for your family.
This layout update makes cleaning your bathroom a total breeze. You will spend way less time scrubbing stubborn grout lines on your hands and knees. Plus, a fresh setup adds serious value to your home if you ever decide to sell.
Think about how much space that old clunky basin actually wastes in your small bathroom. When you replace it with a low-profile basin, you open up the entire room. This gives you more physical space to move around without bumping your elbows.
Safety is another huge deal that we need to talk about honestly. Stepping over a wet, slippery wall that is two feet high is a recipe for disaster. A low-threshold entry point reduces that trip hazard down to almost nothing.
Our local crew understands the unique needs of homeowners living near the Bears Paw Mountains. We know how the local water supply can leave mineral deposits on old fiberglass units. Installing modern, non-porous acrylic walls keeps your new setup looking spotless for years.
To help you compare your options, here is a quick breakdown of what you get when you modernize your layout:
| Feature | Old Deep Tub Setup | Modern Walk-In Setup |
|---|---|---|
| Entry Height | 15 to 20 inches to step over | 3 to 5 inches low-step entry |
| Cleaning Effort | High scrubbing, lots of corners | Easy wipe-down, mold-resistant |
| Floor Space Feel | Cramped and bulky | Open, airy, and spacious |
| Water Usage | High volume to fill the basin | Efficient drainage, lower bills |
First, we start with a friendly face-to-face chat right inside your home to look at your existing plumbing layout. This initial visit is completely free of charge. We take precise measurements so we do not run into any surprises during the actual physical tear-out.
Then, we carefully demo your old heavy cast iron or fiberglass basin without wrecking your surrounding drywall. We inspect the subfloor underneath for any hidden water damage or mold growth. Fixing these issues early saves you thousands of dollars down the road.
Next, our skilled team installs the new slip-resistant base and secures it directly to the studs. After that, we run high-quality plumbing lines to connect your new fixtures. We seal every single joint with premium waterproof silicone to ensure zero leaks behind your walls.
Finally, we mount the beautiful wall panels and add handy extras like grab bars or built-in seating. This entire process usually takes just a couple of days from start to finish. You get a gorgeous, functional wash area without weeks of messy construction dust.
Choosing the right colors and textures lets you express your personal style. You can select wall panels that look exactly like expensive marble or classic subway tile. This gives you high-end beauty without the nightmare of sealing grout every year.
Adding smart storage accessories keeps your soaps and shampoos organized and off the floor. Built-in corner caddies and recessed shelving units maximize your usable space. You can customize the height of these accessories so they are always within easy reach.
Selecting the right hardware finishes ties the whole look of the room together nicely. From matte black to brushed nickel, we offer options that match your existing sink faucet. These small details transform a simple utility room into a private oasis of relaxation.
Living in a cozy community of about 475 residents means you value honest work and fair prices. We keep our overhead low to provide the best possible value to our neighbors. Our team respects your budget while delivering top-tier craftsmanship that lasts.
Considering the median household income of $43,036 in Rocky Boy's Agency, Montana, we know that home improvements are a major investment. That is why we focus on durable materials that do not require constant maintenance or expensive repairs. We help you make a smart investment that pays off in daily convenience.
Working with us means supporting local hands who know the area and its homes inside and out. We treat your property with the utmost respect, cleaning up every bit of debris before we leave. You get peace of mind knowing the job is done right the first time.
Many folks ask if they have to completely relocate their existing plumbing drains during this project. Fortunately, we use specialized bases designed to align perfectly with your current drain location. This clever engineering saves you a ton of money on labor costs.
Another common worry is whether this change will hurt the resale value of your home. Real estate trends show that most modern buyers actually prefer a spacious walk-in setup over an old dusty basin. Unless you have several small toddlers, this upgrade is a huge selling point.
We also get questions about how long you have to wait before using your new setup. Usually, the high-grade silicone sealant needs about twenty-four hours to cure completely. Once that time passes, you are free to enjoy your very first splash in your upgraded space.
Do not spend another day struggling with an outdated bathroom that does not serve your needs. You can easily upgrade to a safer, more open space that brings joy to your morning routine. Our team is ready to help you bring this vision to life.
We invite you to reach out to us today to schedule your completely free home assessment. We will walk you through all the design options and give you an honest, upfront price estimate. Let us handle the hard work while you sit back and look forward to your brand-new bathroom.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Rocky Boy's Agency repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Hill County; the statewide picture lives on Montana; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote