Our Quinter crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Gove County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high, slippery ledge every single morning just to wash up. This common daily frustration actually disappears when you swap your old, deep basin for a modern walk-in stall. You will instantly gain a safer, much more open area that fits your busy lifestyle perfectly.
If you want to make this smart change, we are right here to help you get started. Our local team visits your home to look at your setup and gives you a free project estimate. You can easily get a beautiful, modern space without any stress or guesswork.
Let us face the truth about those giant, dusty basins taking up half your bathroom floor. Most of us rarely have the time to sit and soak for hours anymore. Instead, we want a quick, refreshing wash in a space that feels open and clean.
By removing that bulky barrier, you open up the entire room and make it look twice as large. This change gives you room to breathe and move around freely. On top of that, you get a clean, modern look that makes your home feel brand new.
Safety is another huge deal that you cannot ignore as the years fly by. Slipping while balancing on one foot is a scary thought for anyone. A low-profile entry basin minimizes those daily risks and keeps everyone in your household safe.
Investing in your home always feels a bit scary at first glance. However, buyers absolutely love seeing a sleek, modern washing stall instead of an outdated, stained basin. This simple swap can actually boost your home value when you decide to sell down the road.
We put the figure in writing before any work starts.
| Feature | Old Deep Basin | New Walk-In Space |
|---|---|---|
| Entry Height | High wall to climb over | Low or zero barrier |
| Water Usage | Requires many gallons to fill | Efficient, fast drainage |
| Cleaning Effort | Hard scrubbing on your knees | Easy wipe-down walls |
Which option sounds like less work for your busy schedule? Most people choose the modern setup because it saves them hours of hard scrubbing every single week.
Starting a renovation project might seem overwhelming when you think about the mess and the noise. Fortunately, our friendly local crew keeps things incredibly simple and clean from start to finish. We handle the heavy lifting while you sit back and watch the magic happen.
First, we carefully measure your existing alcove to ensure a perfect, seamless fit for the new base. After that, we remove the old iron or fiberglass unit without damaging your walls or floors. Then, we install beautiful, water-resistant wall panels and a modern, fast-draining floor pan.
This entire process usually takes much less time than a traditional, messy full remodel. You will not have to live in a dusty construction zone for weeks on end. We respect your space and clean up every speck of dust before we leave.
Your home should reflect your unique taste and meet your specific physical needs perfectly. This is why we offer tons of custom options for your new walk-in wash area. You can choose from beautiful tile patterns, modern hardware, and handy built-in storage shelves.
If you need extra help with balance, we can install secure grab bars that look incredibly stylish. Built-in bench seating is another fantastic option for those who prefer to relax while washing. You get to design a space that looks great and works perfectly for your body.
We use high-quality materials that resist mold and mildew growth naturally over time. This means you spend your weekends enjoying your life instead of scrubbing stubborn grout lines. You get a gorgeous, low-maintenance sanctuary that looks sparkling clean with minimal effort.
We love working right here in this beautiful part of western Kansas, where community means everything. Our team understands the local homes, the water quality, and exactly what folks in our area need. We treat every single customer like our neighbor because you actually are.
If you live in Quinter, Kansas, you know how important reliable, honest local service is to our community. With a local population of 889 and a median household income of $49,286, we know that home investments must be smart, durable, and fairly priced. Whether you live near the main highway or closer to the quiet edge of ZIP code 67752, we are ready to drive out to your property.
Our deep roots in this county mean we do not cut corners or use cheap, flimsy materials. We want you to love your new bathroom for decades to come. You can trust our crew to show up on time, work hard, and treat your home with total respect.
Most of our installations take just a few days to complete from start to finish. We work quickly and efficiently so you can get back to your normal daily routine fast.
Yes, we can add sturdy safety features like comfortable benches and secure handrails wherever you need them. These additions provide ultimate peace of mind without sacrificing the modern look of your room.
Absolutely, we provide completely free, no-pressure estimates for every single homeowner who reaches out. We want you to have all the facts and pricing before making any big decisions.
Taking the first step toward a safer, more beautiful bathroom is much easier than you think. You do not have to struggle with that old, awkward tub for another single day. Let our friendly team of local professionals handle the hard work for you.
Contact us right now to schedule your completely free project quote. We will answer all your questions, show you beautiful material samples, and help you design the perfect wash space. Your dream bathroom is just a quick message away!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Quinter repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Gove County; the statewide picture lives on Kansas; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote