Our Pratt crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Pratt County within days.
Written quote at no cost, one callback, no chasing afterwards.
Are you sick of tripping over that huge porcelain wall every time you want to wash up? Getting a fresh walk-in setup makes your daily routine so much safer and faster. Right now, you can get a free estimate to swap that clunky old tub for a modern design.
Let us talk about that giant basin taking up all your floor space. Honestly, most folks rarely take long baths anymore because nobody has time for that. So you end up standing in a slippery basin every single morning. Upgrading to a floor-level pan removes that dangerous obstacle instantly. Plus, it makes your entire room feel huge and modern... dynamic light just bounces off those slick new wall panels much better.
Naturally, safety is a huge deal for a lot of homeowners around here. Falling on wet porcelain can totally ruin your whole weekend or worse. By swapping that old basin for a low-threshold basin, you cut down on trip hazards big time. This setup lets you glide right in without doing high-kick gymnastics. Furthermore, you get to add sturdy grab bars and built-in benches for extra peace of mind.
Besides safety, think about how much time you waste scrubbing nasty grout lines. Old cast iron and fiberglass tubs love to collect gross soap scum in hidden corners. Modern acrylic surfaces stop mildew from sticking in the first place. Consequently, cleaning takes just a quick wipe down with simple soap and warm water. That means fewer weekends spent on your knees scrubbing harsh chemicals.
Starting a bathroom renovation might sound like a chaotic mess, but it actually goes super smooth when done right. First, the old fixtures and surrounding drywall get completely stripped away. Then, installers inspect the hidden wooden studs for any secret water damage or rotten subfloors. Fixes happen right then so your new setup stands on rock-solid bones.
Next comes the crucial plumbing work where drain pipes get repositioned for proper flow. Standard tub drains are usually small, but modern walk-in bases need wider pipes to handle fast water volume. Installers move the supply lines to match your fresh valve locations, ensuring no annoying leaks ever happen behind your walls. After that, heavy-duty waterproof backing boards go up to seal out moisture forever.
Finally, the real magic happens when custom wall panels and slip-resistant pans drop into place. These custom surfaces get measured down to the millimeter so they fit your unique room like a glove. Shower doors or heavy glass panels get mounted tight with solid brass hardware. Suddenly, your drafty old corner transforms into a stunning spa oasis that looks incredible.
Every person washes up differently, so custom options matter a ton for long-term happiness. You can choose deep corner caddies that hold giant shampoo bottles without falling over. Or maybe you want a hand-held sprayer with multi-spray modes to wash pets or rinse feet easily. Adding low-profile thresholds makes stepping inside totally effortless for anyone with stiff knees or sore hips.
To help you visualize what options fit your style, check out this simple breakdown of popular additions:
| Feature Option | Practical Benefit To You | Maintenance Level |
|---|---|---|
| Acrylic Wall Panels | Stops mold growth and wipes clean in seconds without harsh scrubbing | Very Low |
| Fold-Down Seating | Gives you a comfortable spot to relax while keeping floor space wide open | Low |
| Linear Floor Drains | Whisks heavy water flow away fast so you never step in puddles | Medium |
| Frameless Glass Doors | Creates an open visual feel that makes small rooms look twice as big | Medium |
On top of hardware, wall colors play a massive role in how cozy your room feels. You can go with realistic marble patterns that look super expensive without the crazy price tag. Or pick crisp subway tile designs that never go out of fashion. Either way, high-tech composite materials will not crack or chip over time like cheap real tile often does.
Living in central Kansas means dealing with very specific water conditions that affect plumbing daily. Hard water packed with heavy minerals can easily clog up cheap fixtures and leave ugly white stains. Installing high-quality solid brass valves and rub-clean rubber spray nozzles protects your home from scale build-up. That simple choice keeps your water pressure strong and steady for decades.
Houses located in the heart of Pratt County often feature solid foundation framing built back in mid-century eras. Many homes sitting in the 67124 area code have stout joists, but old galvanized pipes love to hide inside those walls. Having a professional peek behind your walls during an estimate catches rusty plumbing before catastrophic leaks wreck your living room ceiling.
Also, local real estate markets show strong demand for smart accessibility updates today. With a median household income floating near $50,771 across our tight-knit population of 6,774 neighbors, smartly spending your home improvement funds matters a lot. Replacing outdated porcelain cast iron with sleek walk-in shower enclosures reliably bumps up overall property resale values. Buyers love seeing modern, zero-barrier bathing spaces ready to go.
Trying to do a major plumbing overhaul yourself over a single weekend usually leads to massive headaches. Water leaks are sneaky devils that can quietly ruin subfloors for months before you notice soft spots underfoot. Professional crews use multi-layer waterproofing systems that seal water inside the pan where it belongs. Saving a few bucks upfront is never worth battling black mold hidden behind wet drywall later.
Another big mistake is keeping tiny legacy drains that cannot handle heavy modern showerheads. High-flow rainfall heads spray out tons of water every minute, which quickly overflows shallow old tub bases. Upgrading to a multi-inch drain setup keeps floor pans totally clear of standing water. That way, you never end up wading in warm soapy water up to your ankles while washing your hair.
Lastly, do not cheap out on hardware finish choices when customizing your new space. Lower-grade plastic fixtures might look shiny at first, but their fake chrome coatings peel off rapidly under daily use. Investing in solid brushed nickel or matte black hardware keeps your space looking pristine even after years of continuous daily use.
Getting a price quote should never feel stressful or pushy in any way. A local technician comes directly to your home to take precise laser measurements of your current alcove space. They look at your existing plumbing locations, wall studs, and subfloor conditions to see what needs tweaking. Then, you sit down with tactile samples to pick out textures, colors, and hardware styles that match your taste.
Furthermore, getting an honest expert eye on site helps avoid weird surprises once construction begins. You get a clear, detailed breakdown of material costs and labor timeframes right upfront. No hidden fees or weird surprise charges get tacked on at the end of the job. That level of transparency lets you budget your home improvement project with absolute confidence.
Once you approve the plan, the whole physical transformation usually takes just a couple short days to wrap up fully. That means very minimal disruption to your household routine and fast access to your shiny new washing space. You can step into a warm, safe, gorgeous stall before you know it.
Ready to stop climbing over high basin walls every morning? Upgrading to a seamless wet space boosts safety, cuts down cleaning chores, and elevates your everyday routine instantly. It truly turns an annoying chore into a relaxing, luxurious experience you look forward to daily.
Don't wait around until a dangerous slip forces your hand. Reach out today to schedule your completely free, no-obligation home consultation with a friendly local expert. Take control of your home's value and comfort by requesting your complimentary quote right now!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Pratt repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Pratt County; the statewide picture lives on Kansas; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote