Our Molson crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Okanogan County within days.
Written quote at no cost, one callback, no chasing afterwards.
Do you hate climbing over high porcelain walls just to get clean? Well, this local upgrade lets you wash off the grime easily without breaking your back.
Most folks in Okanogan County find that their old bathtubs just take up too much space. Because of that, ripping out that heavy basin gives your bathroom a totally fresh feel.
Truthfully, stepping into a low-profile basin keeps you safe from nasty slips and falls. This means you can enjoy your daily routine without constantly worrying about your balance.
Beyond safety, removing that unused soaking vessel opens up your entire floor plan. Consequently, your washing area suddenly looks twice as big as it did before.
Suddenly, you have room to actually breathe while brushing your teeth in the morning. This lets you move around freely without bumping your elbows on the wall.
Plus, smaller bathrooms benefit immensely from having a wide open standing enclosure installed. Which means you will never feel cramped during your morning routine again.
First off, you need to measure the exact footprint of your current setup. Fortunately, professional local contractors handle all these pesky details for you.
Next comes picking the right materials to match your home style and personal tastes. This lets you customize the entire look without spending a fortune on useless extras.
Naturally, proper waterproofing matters more than anything else during this messy construction phase. Therefore, hiring a skilled crew ensures your subfloor stays completely dry for decades.
Acrylic wall panels save you hours of scrubbing grout lines every single weekend. On top of that, these smooth surfaces resist mold growth much better than old tiles.
Meanwhile, choosing tempered glass doors gives your bathroom a sleek and modern vibe. This upgrade adds serious value to properties in zip code 98850 without draining your savings.
| Material Option | Main Benefit | Maintenance Level |
|---|---|---|
| Acrylic Panels | Stain resistance | Very low |
| Tempered Glass | Modern appearance | Medium |
| Stone Resin Base | Extreme durability | Low |
Workers will arrive early in the morning to start tearing out the old cast iron. Because this step creates quite a bit of noise, you might want to step outside for a bit.
Once the old basin goes away, the crew inspects the wooden framing for hidden rot. This lets them fix any underlying structural issues before putting up the new walls.
Afterwards, plumbing lines get adjusted to fit the modern drain and mixing valve setup. Which means your water pressure stays strong and steady every time you turn it on.
Sometimes, old water pipes hide nasty leaks that nobody knew about until demolition day. Luckily, experienced workers fix these plumbing headaches quickly without stalling your project.
Actually, finding these issues early prevents massive structural damage down the road in Washington state homes. This saves you thousands of dollars in unexpected repair bills later on.
Remodeling projects always require a smart budget so you do not run out of funds. Fortunately, updating your washing area offers one of the best returns on investment possible.
Furthermore, future home buyers in the 23-person town appreciate a modern walk-in washing stall. This means your property sells faster when you eventually decide to put it on the market.
Granted, the upfront cost might seem a bit high for a working family budget. However, the daily convenience and safety improvements make every single penny completely worth it.
Smart homeowners always look for ways to cut costs without sacrificing overall quality and durability. That is why getting multiple professional opinions helps you find fair pricing.
Naturally, you should ask local service providers about financing options before signing any final contracts. This lets you spread out payments over time instead of paying everything at once.
Are you ready to transform your outdated bathroom into a sleek washing paradise? Well, reaching out to a local pro is the absolute best way to begin.
Simply request a FREE QUOTE today to find out exactly how much your custom upgrade will cost. This gives you all the facts upfront without any pushy sales tactics.
Do not wait another month struggling to climb over those annoying porcelain basin walls. Contact your neighborhood contractor now and schedule your zero-cost project estimate right away.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Molson repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Okanogan County; the statewide picture lives on Washington; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote