Our Minneola crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Clark County within days.
Written quote at no cost, one callback, no chasing afterwards.
If you feel tired of stepping over that high, dangerous ledge every single morning just to wash off, you are not alone. Many folks right here in Clark County face this exact struggle because old-style basins simply do not match our busy, modern lives anymore. This handy change lets you step right into a fresh, open bathing space without any awkward climbing.
Imagine starting your day with a breezy, walk-in wash rather than a cramped soak in a deep, outdated basin. By making this smart swap, you instantly create a safer environment for everyone in your home. Our dedicated team loves helping folks find their perfect setup, and we always start with a free, no-pressure assessment right in your home.
This beautiful upgrade completely transforms your daily routine from a chore into a quick, refreshing escape. Since we focus on practical, down-to-earth solutions, you will get a space that looks twice as big as before. Let us dive into why changing things up makes so much sense for your home, your safety, and your wallet.
First of all, safety is a massive deal for families, especially if you plan to stay in your home for years to come. Slipping on wet porcelain is no joke, which means getting rid of that tall barrier reduces your fall risk dramatically. This change lets you enjoy your daily routine with total peace of mind and zero stress.
On top of that, cleaning a flat, modern pan is about ten times easier than scrubbing those old, curved porcelain walls. You can finally say goodbye to those painful, back-breaking weekend cleaning sessions on your knees. This means you get to spend more time relaxing and less time fighting stubborn mildew in those hard-to-reach corners.
Actually, many people do not realize how much visual space a bulky, unused soaking basin steals from a standard bathroom layout. Replacing it with a sleek, low-profile pan opens up the entire room, making the area feel bright and breezy. The table below shows a quick comparison to help you see the real-world differences:
| Feature Compared | Old Bulky Basin | Modern Walk-In Wash |
|---|---|---|
| Step-In Height | High barrier (14-18 inches) | Ultra-low threshold (1-3 inches) |
| Maintenance Effort | Heavy scrubbing required | Quick wipe down with mild soap |
| Visual Space Impact | Feels cramped and heavy | Creates a bright, open feel |
Now, you might worry about the price tag of remodeling, which is a totally normal thing to think about. Fortunately, we offer a variety of options that fit different budgets, from basic acrylic setups to high-end custom tile walls. This ensures you get exactly what you need without breaking the bank or feeling overwhelmed by high costs.
Which means you can pick and choose the exact features, colors, and textures that match your personal style perfectly. We even offer handy accessories like sturdy grab bars, built-in corner shelves, and comfortable fold-down seating for extra support. This level of customization guarantees your new space works perfectly for your unique daily needs.
Then, we must consider the actual value this home improvement project adds to your property over time. Most home buyers these days prefer a spacious, modern walk-in setup over a dusty, unused soaking basin they have to clean. Investing in this smart update keeps your home competitive and highly desirable on the local real estate market.
To start, we never believe in high-pressure sales tactics or making you feel rushed into a big decision. When you invite us over, we sit down with you, measure your current setup, and chat about your dream layout. This lets us give you an honest, accurate estimate completely free of charge, with no strings attached.
After you approve the plan, our local crew works fast to minimize any disruption to your busy household. We take great pride in keeping our workspace clean, protecting your floors, and hauling away your heavy old cast-iron basin. This means you do not have to worry about a messy construction zone lingering in your house for weeks.
Usually, we can complete the entire physical transformation in just a few days, depending on the materials you choose. Our professional installers handle the plumbing, waterproofing, and wall surrounds with absolute precision to ensure a leak-free fit. This fast turnaround time means you can start enjoying your brand-new wash space almost immediately.
Being based right around this beautiful region with a warm community of 928 residents, we understand the value of hard work. We know that families with a median household income of around $60,000 expect real, lasting quality for their hard-earned dollars. That is why we treat every single home in the 67865 ZIP code like it belongs to our own family.
Because we operate locally in this corner of Clark County, we are always just a quick drive away if you ever need us. We do not use sub-par materials that crack or fade after a few years of normal use. Instead, we source durable, American-made products designed to stand up to daily wear and tear for decades.
Sometimes, older homes in this part of Kansas present unique plumbing quirks, but our experienced team knows exactly how to handle them. We check your subfloors for hidden water damage and reinforce the drain pipes before putting down your beautiful new pan. This attention to detail prevents future headaches and ensures your peace of mind.
So, why keep putting up with an unsafe, outdated bathroom that makes you feel tired just looking at it? You deserve a beautiful, open wash space that provides absolute coziness and makes your morning routine a joyful experience. Taking the first step towards your dream bathroom is incredibly easy and completely risk-free.
Simply reach out to us today to schedule your free, in-home consultation with one of our friendly local pros. We will look at your current setup, answer all your questions, and design a custom plan tailored to your budget. Let us help you transform your bathroom into a safer, more beautiful space you will love using every day.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Minneola repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Clark County; the statewide picture lives on Kansas; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote