Our Lyndhurst crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Cuyahoga County within days.
Written quote at no cost, one callback, no chasing afterwards.
If you want to swap your clunky old tub for a sleek walk-in stall, this guide shows you how local experts do it.
Actually, many people in our corner of Cuyahoga County realize that their deep basins just take up space and collect dust. Statistics show that the local median household income sits around $75,236, which means homeowners here love investing in smart, valuable property upgrades. Replacing that high-rimmed basin with a modern walk-in option makes daily life much smoother.
As a result, you get a beautiful space that feels much larger. Let us look at how this smart swap works for you.
First of all, stepping over a high wall every morning gets old very fast. When you think about it, most of us do not even have time for long baths anymore anyway... we just want a quick rinse.
Consequently, trading that bulky obstacle for a low-profile base gives you effortless entry. This simple change drastically reduces your chances of slipping on wet porcelain.
Naturally, you also gain a ton of physical elbow room. Because a standard basin takes up a massive footprint, replacing it opens up the entire floor plan.
To help you visualize the difference, here is a quick comparison of the two setups:
| Feature | Old Basin Setup | Modern Walk-In Stall |
|---|---|---|
| Entry Height | 14 to 18 inches to step over | 3 inches or less (low-threshold) |
| Floor Space | Cramped and narrow | Wide and airy feel |
| Cleaning Effort | High (scrubbing deep corners) | Low (wipe-down surfaces) |
Ultimately, this upgrade turns your daily routine into a much safer experience. You will instantly notice how much lighter and wider the room feels.
Now, the fun part begins when you choose your new materials and fixtures. You can select gorgeous non-porous acrylic surrounds or beautiful ceramic tiles that reflect your personal style.
Indeed, adding features like a built-in bench or a corner caddy keeps your soap and shampoo perfectly organized. You can also install a rainfall showerhead alongside a handy handheld sprayer.
Because we focus on customization, you get to decide exactly where every grab bar and shelf goes. Your new daily routine will feel incredibly smooth.
To start off, you need to decide on the threshold height that works best for your household. A low-profile barrier looks incredibly sleek and modern.
Moreover, you can even go for a zero-threshold option if you want a seamless transition from the bathroom floor. This choice ensures that wheelchairs or walkers can roll right in without any issues.
Therefore, you secure your home for the long haul. It is all about making your space work for your changing needs.
Next, you must consider how much maintenance you want to do. Grout lines in traditional tile work require regular scrubbing to prevent mold.
On the other hand, solid surface panels offer a seamless look with zero grout lines to clean. This means you can spend your weekends relaxing instead of scrubbing walls on your hands and knees.
Which means you get the gorgeous look of stone or marble without any of the annoying upkeep. It is the ultimate win-win for busy homeowners.
You might worry that this type of remodeling project will turn your home into a chaotic construction zone for weeks. Fortunately, our crew keeps the process incredibly fast and tidy.
First, we carefully remove your old heavy iron or acrylic basin without damaging the surrounding drywall. After that, we inspect the underlying wood framing and plumbing to ensure everything is completely dry and structurally sound.
Next, we update the drain location to accommodate the new center or end-drain configuration. Once the plumbing is perfect, we install your chosen wall panels and fixtures.
Occasionally, we find old leaks behind the walls once the old basin comes out. Do not panic if this happens in your home.
Because we catch these issues early, we can replace any rotted studs before installing the new stall. This crucial step protects your home from future mold growth and structural issues.
Consequently, your new setup rests on a rock-solid foundation. You can rest easy knowing the job was done right.
Generally, a standard tub drain is only one and a half inches wide. To prevent water backup, we upgrade your drain pipe to a wider two-inch line.
This change allows water to flow away instantly, even with high-pressure showerheads running. It prevents soapy water from pooling around your ankles while you wash.
Ultimately, this attention to detail ensures your new setup performs flawlessly for decades. You get a reliable system that handles heavy daily use.
Living in this beautiful suburb of 13,630 residents means keeping our homes in top-tier shape to maintain property values. Whether you live near the local parks or closer to the shopping districts, upgrading your home pays off.
For instance, potential buyers love seeing a modern walk-in stall rather than an outdated, stained basin. This single modification can make your property stand out in the local real estate market.
Indeed, modern buyers prioritize accessibility and clean lines over outdated garden tubs. You will enjoy the daily luxury now while building equity for the future.
Instead of guessing how much this project will cost, you can find out exactly what to expect. We come right to your home in the local area, which includes the ZIP codes 44124, to look at your space.
During this visit, we measure your current setup and discuss your vision. We then provide a detailed, itemized quote with absolutely no obligation on your part.
This lets you plan your budget without any pressure or hidden surprises. You get honest, straightforward answers from local professionals who care about your satisfaction.
Why wait any longer to get rid of that old, hazardous basin? You deserve a beautiful, open space that makes your morning routine a joy.
Simply reach out to us today to schedule your free, no-pressure design consultation and estimate. Our friendly team is ready to guide you through every step of this exciting home improvement.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Lyndhurst repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Cuyahoga County; the statewide picture lives on Ohio; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote