Our Grymes Hill crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Richmond County within days.
Written quote at no cost, one callback, no chasing afterwards.
Do you feel tired of stepping over a high wall just to wash off the daily grime?
Upgrading your old wash basin to a modern walk-in setup makes your daily routine much faster.
This smart update saves you time and keeps you safe from nasty slips on wet porcelain.
Getting rid of that bulky, unused tub frees up valuable real estate in your restroom.
Indeed, this simple change creates a spacious vibe even in the tightest of layouts.
You deserve a washroom that fits your actual lifestyle instead of holding onto outdated fixtures.
Our local team specializes in swapping out those clunky basins for beautiful, low-profile pans.
By choosing this remodel, you instantly boost the overall value of your home.
We offer a totally free estimate right at your doorstep to help you plan this exciting upgrade.
Statistically speaking, very few adults actually take full baths these days.
Most of us prefer a quick, refreshing spray to start the morning or wind down at night.
Replacing the unused basin with a spacious glass-enclosed stall just makes sense for modern living.
Keeping a giant tub clean requires serious physical effort and lots of harsh chemicals.
On the contrary, a modern walk-in enclosure features non-porous surfaces that wipe down in seconds.
This means you spend less time scrubbing on your knees and more time relaxing.
Safety stands out as another massive benefit of this popular home improvement project.
Removing that high barrier prevents tripping hazards for kids and elderly family members alike.
We install sturdy grab bars and slip-resistant floors to give you ultimate peace of mind.
To help you compare your options, we put together a quick look at how these setups stack up:
| Feature | Old High-Walled Tub | Modern Walk-In Setup |
|---|---|---|
| Entry Height | Usually 14 to 18 inches | Often less than 3 inches |
| Cleaning Effort | High scrubbing required | Quick wipe down |
| Visual Space | Cramps the room | Opens up the floor plan |
Living in this beautiful hilltop community in Richmond County means dealing with unique home layouts.
Many homes here feature older plumbing systems that require a careful, experienced hand during demolition.
Our crew understands the local building styles and always respects your property from start to finish.
With a cozy local population of just under five thousand residents, word of mouth means everything.
We treat every single homeowner like our neighbor because you literally are our neighbor.
Our team works efficiently to minimize disruption so you can enjoy your new space quickly.
Whether your home sits near the local college campus or closer to the scenic parks, we come to you.
We serve the entire local area, including the prominent 10301 ZIP code.
You can trust us to handle the permits and logistics while you focus on picking out beautiful tiles.
Selecting the perfect wall surrounds determines how long your new setup will last.
High-quality acrylic offers a seamless look that resists mold and mildew growth over time.
This material keeps your budget intact while still delivering a gorgeous, clean appearance.
If you prefer a touch of luxury, classic ceramic or stone tiles might be your best bet.
These materials allow for endless customization and unique patterns that reflect your personal style.
However, they do require occasional sealing to keep the grout lines looking fresh and bright.
We guide you through these choices during our initial consultation at your house.
This hands-on approach ensures you get the exact look you want without any surprise costs.
Our goal is to deliver a durable space that brings you joy every single morning.
First, our friendly technicians arrive to carefully protect your floors and clear out the old fixture.
We disconnect the old drains and inspect the underlying subfloor for any hidden water damage.
Fixing these hidden issues early prevents costly headaches down the road.
Next, we run new plumbing lines to match your brand-new fixtures and drain location.
This step ensures optimal water pressure and fast drainage so you never stand in puddles.
We then install the waterproof backing materials to protect your walls from moisture.
Finally, we place the new low-profile pan and finish the gorgeous wall surrounds.
We seal every joint with premium silicone to guarantee a completely watertight seal.
Before we pack up, we clean the workspace thoroughly so it looks absolutely perfect.
Adding a built-in bench or a fold-down seat maximizes your convenience during your daily wash.
This feature lets you relax under the warm water without standing for long periods.
It also adds a spa-like feel to the room that makes your home feel extra special.
Upgrading to a handheld wand alongside your main showerhead provides incredible flexibility.
This setup makes it incredibly easy to wash pets or clean the enclosure walls.
You will wonder how you ever got by without this simple plumbing addition.
Investing in thick, frameless glass doors elevates the entire look of your restroom.
These doors bounce light around the space, making the area feel bright and airy.
This modern touch really appeals to future buyers if you ever decide to sell.
Planning a remodel can feel a bit overwhelming when you try to do it all alone.
That is why we offer straightforward advice and clear options tailored to your specific budget.
We take the guesswork out of the process so you can actually enjoy the transformation.
Our team takes great pride in serving homeowners across this lovely part of Staten Island, New York.
We know the local housing stock inside and out, from historic builds to modern apartments.
This deep local knowledge means we anticipate challenges before they ever cause delays.
Do not let another day go by struggling with an awkward, outdated bathroom setup.
Contact us today to schedule your completely free home assessment and written estimate.
We look forward to helping you create a beautiful, accessible space that you will love for years...
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Grymes Hill repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Richmond County; the statewide picture lives on New York; the wider region is the Northeast; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote