Our Formoso crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Jewell County within days.
Written quote at no cost, one callback, no chasing afterwards.
Getting stuck in a deep, slippery basin during your morning routine can feel like an Olympic sport you never trained for. You deserve a bathroom layout that actually fits your daily life instead of forcing you to climb over high barriers just to wash off. Our team specializes in swapping out those outdated, high-walled basins for sleek, low-profile entryways that make bathing feel like a trip to a high-end spa.
This simple layout upgrade completely transforms your daily routine. Since we focus on removing old cast-iron or acrylic basins and installing roomy, modern standing enclosures, you can finally say goodbye to stubbed toes and dangerous slips. This smart change instantly opens up your floor plan while making the entire room look twice as large.
If you want to explore the possibilities for your home, you can request a free estimate today. Our friendly local pros will come right to your door to measure your space and discuss your layout ideas. We love helping folks update their homes without any unnecessary hassle or stress.
Think about how often you actually fill that deep basin with water to take a soak. Most of us just stand in it anyway, which means you are constantly negotiating a slippery hurdle for no good reason. By replacing that bulky relic with a modern walk-in unit, you gain a safer and much more practical space.
This remodeling choice also saves you a ton of cleaning time because modern wall surrounds do not have the deep corners where grime loves to hide. Our seamless wall panels resist mold and mildew, which means you can spend your weekends doing things you actually enjoy. On top of that, these systems use tough, non-porous materials that look brand new for years with just a quick wipe down.
To help you compare your options, we put together a quick look at how these setups stack up:
| Feature | Old Basin Setup | Modern Stand-Up Stall |
|---|---|---|
| Entry Height | High 15-inch wall to climb over | Low-threshold or barrier-free entry |
| Floor Space | Cramped and narrow standing area | Wide, open floor with room to move |
| Maintenance | Grout lines and corners that harbor mold | Smooth, non-porous surfaces that wipe clean |
Stepping over a high ledge on a wet surface is a recipe for a nasty fall. By lowering that entry point to just a few inches, you significantly reduce the risk of slips and injuries in the bathroom. This upgrade brings immense peace of mind, especially for households with seniors or anyone dealing with limited mobility.
You can also customize your new setup with sturdy grab bars, built-in benches, and slip-resistant floors. These smart features ensure that you can maintain your independence and feel secure every single time you step in to wash. We focus on creating a space that looks beautiful while keeping your physical safety as the top priority.
Bulky old basins take up a massive amount of physical and visual real estate in a standard bathroom. Installing a sleek, glass-enclosed standing area creates an open sightline that makes your whole room feel much brighter and larger. This simple shift in layout can turn a cramped, dark bathroom into a refreshing oasis.
Furthermore, you can choose from a variety of stylish wall patterns, like classic subway tile or modern stone textures. These options let you express your personal style without the headache of sealing real grout lines every year. You get all the visual appeal of luxury masonry without any of the high-maintenance drawbacks.
Selecting the right materials for your wet area determines how long your new setup will last and how much work it takes to maintain. We offer premium acrylics and composite materials that do not chip, crack, or fade over time. These high-tech options provide a gorgeous, high-end look while keeping your project affordable and durable.
If you prefer a more custom touch, we can install gorgeous glass doors that slide smoothly or swing open easily. These heavy-duty glass panels keep water exactly where it belongs while letting natural light fill your entire washing space. You can choose from clear, frosted, or textured glass to get the perfect balance of privacy and openness.
Many homeowners worry that a major bathroom renovation will leave them without a working restroom for weeks on end. Fortunately, our experienced crew can complete most of these custom transitions in just a couple of days. We carefully measure your existing alcove beforehand so that your new custom system fits like a glove on installation day.
After we protect your floors and clear out the old basin, we inspect the underlying wood and plumbing to ensure everything is rock-solid. This meticulous approach means we catch and fix any hidden water damage before it can cause future trouble. Once the foundation is perfect, we install your new low-threshold base and wall panels with precision.
We are proud to serve the hardworking folks living in the quiet community of Formoso, Kansas, where life moves at a peaceful pace. With a local population of around 92 residents and a median household income of $26,750, we know how important it is to get real, honest value for your hard-earned dollar. Our team treats every single home in the 66942 ZIP code area with the utmost respect and care.
Because we live and work nearby, we understand the specific housing styles and plumbing setups common in this part of the state. We do not believe in pushy sales tactics or hidden fees, which is why we always provide a clear, upfront estimate. Our goal is to make your home improvement project as smooth and worry-free as possible.
Whenever you are ready to make your bathroom safer and more beautiful, we are here to help you get started. You can easily request a free estimate, and we will set up a convenient time to visit your property. Let us take care of the heavy lifting so you can enjoy a gorgeous, modern washing space that fits your lifestyle perfectly.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Formoso repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Jewell County; the statewide picture lives on Kansas; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote