Our Falfurrias crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Brooks County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high porcelain barrier every single morning just to wash up. Many homeowners in Brooks County face this exact struggle daily. This simple swap turns your outdated bathroom into a highly accessible haven.
By making this smart change, you instantly eliminate a major tripping hazard. You also reclaim a bunch of physical space in your daily routine. Best of all, a local team can visit your home to measure everything and give you a free estimate on the spot.
Imagine stepping onto a flat, slip-resistant floor instead of a curved, slippery surface. That is the reality of swapping out your old basin for a low-profile base. It makes your bathroom feel twice as big. You get to enjoy a sleek, modern look that matches your lifestyle.
Think about how often you actually take a full soak. Most busy people just want a fast, refreshing wash before work or bed. Which means that bulky old basin is just wasting valuable square footage in your home.
This upgrade provides incredible convenience for everyone in the family. Kids can step in easily, and older adults do not have to worry about losing their balance. On top of that, cleaning a flat floor with acrylic walls is way easier than scrubbing grout lines on your hands and knees.
Let us look at how these two setups compare in your daily life:
| Feature | Old Bulky Basin | New Walk-In Setup |
|---|---|---|
| Step-In Height | Typically 14 to 18 inches high | Usually under 3 inches or flat |
| Cleaning Effort | Hard scrubbing on curved surfaces | Quick wipe down on flat panels |
| Floor Space | Feels cramped and cuts off the room | Opens up the visual layout |
Now, you can see how much easier life gets after the change. You get a space that fits your actual habits. It is all about making your daily routine smooth and worry-free.
First, the crew carefully removes the old cast iron or steel fixture. This reveals the hidden plumbing and wall studs behind the old setup. Which lets us check for any hidden water damage or mold before putting the new materials in.
We fix any rotted wood we find so your new setup stays solid for decades. You do not want to build a beautiful new wash area on top of a soggy foundation. This thorough inspection gives you total peace of mind.
After the old unit is gone, the drains need some professional attention. Because a standard basin uses a smaller drain line, we usually expand it to a wider two-inch pipe. This ensures that water rushes away instantly without pooling around your feet.
We also install pressure-balancing valves to keep your water temperature stable. This means no more sudden freezing or scalding surprises when someone flushes a toilet elsewhere in the house. Your safety remains our top priority during this phase.
Next comes the placement of the sturdy new floor pan. We secure this base directly to the subfloor to prevent any flexing or squeaking when you stand on it. Then, high-quality acrylic walls go up to seal out moisture.
These non-porous walls prevent mold from ever taking hold in your wet area. This lets you skip the harsh chemicals during your weekend cleaning chores. A simple microfiber cloth is all you need to keep it shining.
Choosing the right accessories lets you tailor the area to your exact needs. You can add a built-in bench for ultimate relaxation while washing. This option adds incredible cozy warmth and utility to the setup.
Adding grab bars provides extra stability without looking like a sterile hospital room. Modern fixtures come in beautiful finishes like matte black or brushed nickel. These choices let you express your personal style perfectly.
Consider adding recessed niches to hold your shampoos and soaps. This keeps clutter off the floor and off the main ledge. Which means your space always looks clean, organized, and ready for guests.
Living in a quiet town of 4,644 people means we value practical, long-lasting home improvements. Many homes near the heart of Falfurrias, Texas, have older layouts that need a modern touch. Updating your bathroom increases your home value significantly.
With a local median household income of $25,772, we understand the importance of budgeting wisely. We design our services to be highly cost-effective and durable. You get premium materials that will not require constant repairs down the road.
We serve families all over the 78355 ZIP code with pride and dedication. Our team travels straight to your door to inspect your current layout. We listen to your ideas and provide a detailed, honest plan with no hidden fees.
We know that remodeling can feel overwhelming and messy. That is why we treat your home with the utmost respect from start to finish. We lay down protective drop cloths to keep your floors clean throughout the process.
Our fast turnaround times mean you will not be without a bathroom for weeks on end. Most of our projects wrap up in just a couple of days. We work quickly but never cut corners on quality.
Getting a custom-fit solution means you do not have to settle for a generic kit. We measure your exact space to ensure a tight, leak-free fit. This custom approach prevents water damage from ruining your subfloors in the future.
Ready to transform your cramped bathroom into a beautiful, spacious walk-in area? Our friendly local team is ready to help you take the first step. We offer completely free, no-obligation quotes right in your home.
We will sit down with you, look at your current plumbing, and discuss your design ideas. You get a clear picture of the costs and timeline before any work starts. This simple conversation helps you make the best decision for your household.
Do not spend another day struggling with a high, dangerous step. Reach out to us today to schedule your free consultation. Let us build a space that brings peace, safety, and joy back to your daily routine.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Falfurrias repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Brooks County; the statewide picture lives on Texas; the wider region is the South; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote