Our Fairacres crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Doña Ana County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you are tired of climbing over that high porcelain ledge every single morning just to get clean. Since you want to upgrade your daily routine, swapping that old, dusty basin for a modern, walk-in stall makes perfect sense. This smart update instantly makes your daily routine faster and much safer too.
Actually, many homeowners in Doña Ana County are realizing that they do not even use their deep tubs anymore. If you find yourself slipping on wet enamel, switching to a low-profile base keeps you safely on your feet. Our team visits your home to measure everything and gives you a detailed estimate without charging a single cent.
By making this change, you will finally stop worrying about dangerous bathroom slips. Let us look at how this quick renovation completely transforms your daily life and boosts your property value.
First of all, think about how much space you actually waste with that bulky, unused basin. By removing it, you open up the entire room and create a breezy, modern layout. This change gives your bathroom a fresh, open feel that makes morning prep a total breeze.
Besides saving space, cleanup becomes incredibly easy when you get rid of those deep, rounded corners where grime loves to hide. Since we install non-porous acrylic surrounds, you will spend your weekends relaxing instead of scrubbing moldy grout lines. That means less time on your knees with harsh chemicals and more time enjoying your beautiful home.
On top of that, your safety should always come first in a wet environment. Because our new setups feature ultra-low thresholds, you can say goodbye to those awkward, precarious balancing acts. This modification protects your joints and gives you peace of mind every time you step in to wash.
To help you compare your options, we put together this quick breakdown of the two setups:
| Feature | Old Basin Setup | Modern Walk-In Stall |
|---|---|---|
| Step-In Height | High (14 to 18 inches) | Low (under 3 inches) |
| Maintenance | Hard scrubbing, dirty grout | Wipe-clean acrylic, mold resistant |
| Floor Space | Cramped and bulky | Open, spacious feeling |
Now, you might wonder how this project fits into the local market around the 88033 ZIP code area. With a local median household income of $51,161, we know that every single dollar you spend on your property needs to count. Investing in this specific wet-area upgrade delivers some of the highest returns on investment for local homes.
Indeed, most prospective buyers nowadays look for sleek, accessible walk-in options rather than dated, dusty soaking tubs. If you plan to stay in your home long-term, this modification allows you to age in place gracefully. You will not have to worry about moving to an assisted facility just because your bathroom became too difficult to navigate.
When you contact us, we drive right out to your property in Fairacres, New Mexico, to inspect your current plumbing. Because every house has its own unique quirks, we examine the subfloor and pipe alignment carefully before we write down any numbers. This thorough inspection ensures you get an honest, accurate price estimate with absolutely no hidden fees later on.
When it comes to choosing your new setup, you have some fantastic, heavy-duty options to explore. For instance, high-tech non-porous acrylic resists scratches, chips, and stubborn hard water stains. This durable material keeps your bathing space looking brand new for decades without requiring constant polishing.
If you prefer a more customized look, we can install gorgeous wall panels that mimic natural stone or high-end tile. This design choice gives you all the visual appeal of a luxury spa without any of the leaky grout lines. You get to customize the colors, built-in shelving, and grab bars to match your personal taste perfectly.
Which means you get a tailor-made oasis designed specifically for your daily physical needs. We can add comfortable built-in seating, slip-resistant textured floors, and sturdy handrails exactly where you need them most. Our job is to make sure your new setup fits your body and your lifestyle like a glove.
Fortunately, you do not have to endure weeks of loud construction, dust, and chaotic mess in your home. Our streamlined process allows us to complete most of these wet-area swaps in just a couple of days. We respect your schedule and keep our workspace incredibly clean from start to finish.
Initially, we carefully protect your flooring and remove the old, heavy cast iron or fiberglass basin. Next, our experienced team inspects the exposed wooden framing for any hidden water damage or rot. If we find any issues, we repair them immediately so your new floor base rests on a rock-solid foundation.
After updating your old valves and drain pipes, we slide the new low-threshold pan into its perfect position. Then, we install the seamless wall surrounds and seal every single joint with industrial-grade, mold-resistant silicone. Finally, we clean up every speck of dust, test the water flow, and hand over your beautiful new space.
Since we love helping our neighbors improve their homes, we make the starting process completely stress-free. You do not have to commit to anything or pay a single dollar just to find out what is possible. We believe in providing clear, upfront information so you can make the best decision for your family.
During our visit, we will sit down with you, look at material samples, and design a custom plan together. Whether you want a simple safety upgrade or a gorgeous modern makeover, we have you covered. Our detailed written estimate will show you exactly how affordable this big change can be.
Why keep struggling with an unsafe, outdated bathroom when a beautiful solution is just a quick message away? Get in touch with us right now to request your free, no-obligation home assessment. Let us help you create a safer, brighter, and much more functional home today!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Fairacres repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Doña Ana County; the statewide picture lives on New Mexico; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote