Our Ellsworth crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Nobles County within days.
Written quote at no cost, one callback, no chasing afterwards.
If you struggle to climb over a high porcelain wall every single morning just to wash your hair, a modern safety upgrade can change your life instantly. Replacing that clunky old basin with a sleek walk-in stall makes your daily routine much safer and faster. Our team visits your home to measure your space and gives you a free estimate to get this hassle solved once and for all.
First of all, nobody actually has time to take long baths anymore in our busy world. Most of us just want a quick, hot spray of water without having to step over a dangerously slippery ledge. By choosing a low-profile shower pan instead of that giant tub, you instantly create a safer environment for everyone in your home.
On top of that, those old deep basins take up a massive amount of physical space in a small bathroom. When you swap it out for a modern walk-in setup, you suddenly open up the entire room. This makes your whole bathroom feel way larger and much lighter than it did before.
Honestly, cleaning a giant tub is a total nightmare that ruins your weekends and hurts your back. Replacing those old, moldy tile grout lines with seamless acrylic walls lets you wipe down the whole space in seconds. Which means you get to spend your Saturday doing what you actually enjoy instead of scrubbing grime.
To start with, accessibility is the biggest reason families choose to make this smart swap. If you plan to stay in your home as you get older, installing a barrier-free entry protects you from nasty slips and falls. This peace of mind is worth every single penny.
| Feature | Concrete Benefit for You |
|---|---|
| Low Threshold Entry | Eliminates tripping hazards and makes stepping in effortless. |
| Non-Slip Textured Floor | Provides extra grip for your feet to prevent dangerous falls. |
| Acrylic Wall Surrounds | Resists mold and mildew so you spend less time scrubbing. |
| Built-In Seating Options | Allows you to sit down and relax safely while washing. |
Consequently, your property value gets a nice little boost when you update these outdated fixtures. Buyers today actively look for modern, clean washrooms that do not require immediate renovation work. This simple home improvement project pays off big time when it comes time to sell your house.
In addition to that, you can customize your new setup with cool features like built-in benches, sturdy grab bars, and recessed shelving. This lets you design a personalized space that fits your exact physical needs and style preferences. You get a space designed specifically for your daily routine.
First, our friendly local crew arrives at your door to inspect your current plumbing setup and take precise measurements. We sit down with you to discuss your favorite styles, colors, and safety accessories. This ensures you get the exact look you want without any annoying surprises along the way.
Then, we carefully remove your heavy old cast iron or fiberglass tub without damaging your walls. We inspect the underlying wood and pipes to make sure there is no hidden water damage or rot. Fixing these hidden issues early saves you from massive headaches and expensive repairs down the road.
After that, we install the new leak-proof base and gorgeous wall panels with professional precision. Our team hooks up your new fixtures and cleans up every speck of dust before we leave. You get a stunning, functional space ready for use in just a couple of days.
Living in a cozy Nobles County town with 469 people means we truly care about helping our neighbors. We understand the specific plumbing challenges that older homes in the 56129 area often face. Our team knows how to handle these unique issues quickly and professionally.
Since the median household income here is around $44,773, we always keep our pricing fair, honest, and completely transparent. We believe everyone deserves a safe, beautiful washroom without breaking the bank. That is why we offer completely free, no-obligation estimates right in your home.
Whether you live near the heart of Ellsworth, Minnesota, or just outside of town, we are ready to drive out to your property. We treat your home with the utmost respect, just like we would treat our own grandmother's house. You can trust our local team to do the job right the first time.
Naturally, you want materials that will stand up to daily wear and tear for decades. We use high-quality, impact-resistant acrylics that do not chip, crack, or fade over time. This keeps your washroom looking brand new and sparkling clean for years to come.
Moreover, these modern materials retain heat much better than cold, old-fashioned iron or steel basins. This keeps your feet warm and cosy while you wash up on those freezing winter mornings. You get a much more comfortable experience every time you step inside.
Besides, the seamless design prevents water from leaking behind your walls and causing hidden mold growth. Protecting your home's structural integrity is our absolute top priority during every single installation. You can sleep easy knowing your walls are completely dry and safe.
To get started, all you have to do is reach out to us to schedule your quick home visit. We work around your busy schedule to find a convenient time to look at your space. Our friendly estimator will answer all your questions without any high-pressure sales tactics.
During this visit, we help you choose the perfect colors and accessories to match your home's unique style. We provide a detailed, written quote so you know the exact cost before we start any work. This keeps you in total control of your budget and your home improvement project.
Finally, you can stop stressing about climbing over that high wall and start enjoying a safer, easier routine. Taking action today protects your physical health and upgrades your home's overall value. Let us help you create the beautiful, modern washroom you truly deserve!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Ellsworth repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Nobles County; the statewide picture lives on Minnesota; the wider region is the Midwest; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote