Bathtub To Shower Conversion

Bathtub To Shower Conversion in Edwardsville, Alabama (AL)

Our Edwardsville crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Cleburne County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
202
County
Cleburne County
State
Alabama
Region
South
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Tired of climbing over that high porcelain barrier?

Every single morning you face the same old daily obstacle course in your washroom. Climbing over that tall, slippery ledge just to rinse off feels like an unnecessary gymnastics routine. This makes your daily routine feel way more dangerous and tiring than it should be. Fortunately, you can swap that deep basin for a sleek walk-in stall and transform your daily routine instantly.

By making this simple switch, you gain precious floor space and peace of mind. Getting rid of the old basin reduces the risk of slips and falls. This means you can finally relax in a modern space that fits your lifestyle. Our local crew handles everything from start to finish, so you do not have to worry about a thing.

Actually, we are offering a free project estimate right now for your home upgrade. We love helping folks update their older homes with modern fixtures. Grab this chance to make your daily routine safer and much more enjoyable.

Why modernizing your washroom layout makes perfect sense

When you think about it, who actually has time for long, soaking baths these days? Most of us just want a quick, refreshing spray without the hassle of a giant basin to clean. Upgrading to a low-profile stall means you spend less time scrubbing hard-to-reach corners. Which means you get to enjoy your weekends instead of fighting stubborn soap scum.

On top of that, a modern walk-in option looks incredibly sharp and opens up the whole room. Smaller homes in Cleburne County often have compact washrooms that feel way too cramped. Installing a low-threshold entry creates a sense of openness and luxury. This simple design trick makes your entire washroom feel twice as big as before.

Additionally, this upgrade is a smart investment for the future value of your property. Buyers today actively search for accessible homes with stylish, walk-in features. So you get to enjoy the upgrade now while boosting your home equity for later. It really is a win-win situation for any smart homeowner.

The step-by-step process of our custom transformations

First, we come out to look at your current layout and discuss what you want. We measure your existing alcove precisely so the new pan fits like a glove. This lets you choose the perfect colors, wall patterns, and fixtures without any guesswork. We believe in keeping things simple and clear from the very first day.

After we agree on the design, our crew carefully removes your old heavy cast-iron or steel basin. We inspect the subfloor underneath to ensure there is no hidden water damage or mold. If we find soft wood, we repair it immediately so your new floor remains rock-solid. This attention to detail protects your home from future leaks and costly structural repairs.

Next, we install the new drain plumbing, heavy-duty backing, and your chosen wall panels. We seal every single seam with high-grade silicone to guarantee a completely watertight seal. Finally, we install your new showerhead, sliding glass doors, and safety grab bars. When we finish, our team cleans up every speck of dust so you can use your new space right away.

Comparison of Basin and Walk-In Options
Feature Old Deep Basin New Walk-In Stall
Entry Height 15 to 18 inches 2 to 5 inches
Cleaning Time High (lots of bending) Low (easy wipe-down)
Safety Level Moderate slip risk High safety rating
Visual Space Cuts room in half Opens up the floorplan

Choosing the right materials for your style and budget

Now, let us talk about the actual materials you can choose for your new setup. Acrylic surrounds are incredibly popular because they are non-porous and resist mold naturally. This keeps your cleaning routine down to a quick wipe with a microfiber cloth. Plus, they come in beautiful stone patterns that look just like real marble.

If you prefer a more traditional look, custom tiling offers endless design possibilities. You can mix and match ceramic tiles to create a unique mosaic design on your walls. However, tile requires grout, which means a bit more scrubbing over the years. We help you weigh these pros and cons so you make the best choice for your lifestyle.

On the other hand, solid surface walls offer a seamless look with zero grout lines. This high-end option provides incredible durability and resists scratches beautifully. No matter your budget, we find a solution that looks amazing and lasts for decades. We customize every detail to match your personal taste.

Enhancing safety and accessibility for everyone in the house

Safety is not just for older folks... anyone can slip on a wet surface. Adding a low-entry threshold removes the main tripping hazard in your washroom entirely. This provides peace of mind for kids, grandparents, and everyone in between. You can finally step in and out of the spray zone without holding your breath.

To make things even safer, we can install secure grab bars directly into the wall studs. These are not those ugly, institutional bars you see in public restrooms. Modern grab bars look like stylish towel racks and match your existing fixtures perfectly. They offer solid support exactly where you need it most.

Additionally, we can add a comfortable built-in bench or a fold-away seat. This lets you sit down and relax while washing your feet or shaving your legs. Combining these features creates a spa-like experience that keeps you safe and secure. It is all about making your daily routine as stress-free as possible.

Improving water efficiency and lowering utility bills

Did you know that taking a bath uses way more water than a quick rinse? A typical deep basin requires about thirty-five to fifty gallons of hot water to fill up. In contrast, a modern low-flow showerhead uses only about two gallons per minute. This simple change reduces your monthly water consumption significantly.

Which means you save money on your utility bills while conserving local water resources. Over the course of a year, these savings really start to pile up in your wallet. Plus, your water heater does not have to work nearly as hard. This extends the lifespan of your plumbing appliances while keeping your home efficient.

Our commitment to local homeowners

We take pride in serving our neighbors in this charming corner of Cleburne County. With a local population of just 202 residents, we treat every customer like a close friend. Our community in Edwardsville, Alabama (AL), USA, deserves top-tier craftsmanship and honest pricing. We understand the unique historic homes in the 36261 ZIP code area inside and out.

Since the median household income here requires smart budgeting, we keep our prices highly competitive. We do not believe in hidden fees or high-pressure sales tactics. Our team gives you a straightforward estimate and lets you make the decision on your own time. We build relationships based on trust, quality work, and local pride.

Ready to transform your home with a free estimate?

Do you want to take the first step toward a safer, more modern washroom today? Getting your free, no-obligation quote is incredibly easy and takes just a few minutes. We come directly to your home, assess your space, and provide a detailed price breakdown. This allows you to plan your project without any financial surprises down the road.

Why keep struggling with an outdated, hard-to-clean basin that you do not even use? Let us help you design a beautiful, accessible walk-in space that you will love every single day. Our friendly crew is ready to answer all your questions and bring your vision to life. Request your free estimate now to schedule your free home consultation today!

Why the tub goes in Edwardsville

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Edwardsville

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Edwardsville

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Edwardsville

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Edwardsville

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Edwardsville repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Edwardsville

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Edwardsville in short

StandingIncorporated place
Population202
ZIP codes36261
Land area16.4 sq mi
Density12 per sq mi

For the bigger map: county seat pages start at Cleburne County; the statewide picture lives on Alabama; the wider region is the South; background reading sits on Wikipedia.

Bathrooms we convert around Edwardsville

Conversions booked across Alabama

One three-day job stands between this bathroom and its best fixture.

Get my free quote