Bathtub To Shower Conversion

Bathtub To Shower Conversion in Dayton, Nevada (NV)

Our Dayton crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Lyon County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
9,508
County
Lyon County
State
Nevada
Region
West
Median income
$63,278
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Tired of Climbing Over That Huge Ceramic Wall Just to Get Clean?

Maybe you feel like your old bathroom is holding you hostage every single morning. Most of us just want a quick, easy rinse without navigating a slippery, deep basin that feels more like an obstacle course than a modern washroom. By updating your layout to a sleek walk-in setup, you instantly gain safety and open up your whole room.

Since you live in a beautiful historic area where homes range from vintage ranches to cozy modern spots, your current setup might feel a bit outdated. This upgrade gives you back your floor space and cuts your cleaning time in half. Let us show you how we make this transition painless and quick.

Why Swapping Your Tub for a Walk-In Setup Makes Perfect Sense

First of all, think about how much water you actually waste filling up a giant basin that you barely use. By switching to a modern, low-profile basin with a glass enclosure, you save precious resources and lower your monthly bills. This lets you enjoy a spa-like feel right at home.

Besides saving water, the safety boost you get is absolutely massive. Slipping on wet porcelain is a real danger for everyone from toddlers to grandparents. Our team installs low-threshold entries that eliminate that high step entirely.

On top of those benefits, cleaning becomes a breeze when you get rid of old grout lines. We use high-quality, non-porous acrylic surrounds that resist mold and grime. Which means you can spend your weekends enjoying the Nevada sunshine instead of scrubbing on your hands and knees.

To help you see the difference, here is a quick comparison of what you get when you make the switch.

Feature Old Deep Basin Setup New Walk-In Setup
Entry Height 15 to 18 inches to step over Zero to 3 inches maximum
Cleaning Time Hours of heavy scrubbing Quick wipe down with mild soap
Visual Space Cramped and bulky look Open, airy, and modern feel
Water Usage High volume needed to fill Efficient, targeted flow

The Real Value of Upgrading Your Daily Wash Routine

Now, let us talk about the actual value this change brings to your property. Many buyers nowadays do not even want a giant soaking basin that takes up half the room. They prefer a spacious, modern stall with nice fixtures and built-in seating.

This means your investment actually protects your home value over the long haul. When you decide to sell your property down the road, a modern washroom stands out. Buyers in Lyon County love seeing updated spaces that do not require immediate renovation work.

Naturally, you might worry about the mess and chaos of a home remodel. Our experienced local crew handles everything from teardown to the final plumbing connections with minimal disruption. We treat your home with the utmost respect and keep the workspace tidy.

How We Customize Your New Walk-In Stall

Every home is different, which is why we never believe in a one-size-fits-all approach. You can choose from gorgeous textured wall panels that look like real stone but require none of the maintenance. This lets you match your personal style without breaking your budget.

To make your daily routine even better, we can add useful accessories during the install. Think about sturdy grab bars that blend in beautifully with your chrome or matte black fixtures. We also install built-in corner shelves to keep your shampoos and soaps organized.

If you prefer to sit down while washing, we offer comfortable built-in benches. These fold-up or permanent seating options add a touch of sheer convenience to your daily routine. You get a space tailored exactly to your physical needs and aesthetic tastes.

Choosing the Right Enclosure for Your Space

While some people love a completely open wet-room design, others prefer glass doors. We offer heavy-duty sliding glass doors with water-repellent coatings that stay crystal clear. This keeps the water exactly where it belongs while letting light flow through the room.

If you want a simpler look, a classic curtain rod works wonderfully too. This option keeps your upfront costs lower while still giving you that wide-open feel. We help you weigh the pros and cons of each style during our initial visit.

Upgrading Your Drainage and Plumbing Correctly

Because a standard basin drain is smaller than a dedicated stall drain, our plumbers resize the pipes. This step ensures that heavy water flow drains away instantly without pooling at your feet. We do not cut corners on the hidden parts of your plumbing.

We also inspect the subfloor underneath your old unit for any hidden water damage. If we find soft wood or old leaks, we repair them before installing your new base. This attention to detail prevents future headaches and protects your home structural integrity.

Our Process From Start to Finish in Your Neighborhood

When you contact us, we schedule a convenient time to look at your existing bathroom layout. We measure everything carefully and discuss your goals for the space. After that, we provide a detailed plan so you know exactly what to expect.

Once we start the physical work, we protect your carpets and floors with drop cloths. We remove the old heavy iron or acrylic basin carefully to avoid damaging your walls. Our team works efficiently to get your new system up and running as fast as possible.

After the installation is complete, we clean up every speck of dust and debris. We walk you through the finished project to make sure you love every single detail. Then, we leave you to enjoy your brand-new, beautiful space.

Why Local Homeowners Trust Us for Their Bathroom Upgrades

Since we live and work right here in the area, we understand the local housing styles. Whether you live in a historic home near the river or a newer build in the valley, we know how to handle your specific plumbing. We bring years of hands-on experience to every single job site.

Our neighbors appreciate our honest, down-to-earth approach to home improvement. We do not use high-pressure sales tactics or hide extra fees in the fine print. You get clear communication, reliable craftsmanship, and a gorgeous finished product.

For example, did you know that the median household income here is around $63,278, and we work hard to keep our services affordable for hard-working families? We serve the entire community of 9,508 residents across the 89403 ZIP codes and surrounding areas. Our reputation depends on your satisfaction, so we never rush a job.

Get Your Project Started Today with a Free Estimate

If you are ready to stop struggling with an outdated bathroom, we are here to help. Taking the first step is incredibly easy and does not cost you a single dime. We would love to visit your home and give you a detailed assessment.

By requesting a complimentary cost estimate, you get all your questions answered by a friendly local professional. We show you material samples and help you design a space that fits your lifestyle perfectly. There is absolutely no obligation to buy when you reach out us out for a look.

Do not spend another day dealing with a drafty, hard-to-clean bathroom that does not serve your needs. Contact us today to secure your free quote and start planning your dream washroom upgrade. We look forward to helping you transform your home into a safer, more open space.

Why the tub goes in Dayton

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Dayton

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Dayton

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Dayton

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Dayton

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Dayton repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Dayton

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Dayton in short

StandingIncorporated place
Population9,508
ZIP codes89403
Land area34.9 sq mi
Density272 per sq mi
Median income$63,278

For the bigger map: county seat pages start at Lyon County; the statewide picture lives on Nevada; the wider region is the West; background reading sits on Wikipedia.

Bathrooms we convert around Dayton

Conversions booked across Nevada

One three-day job stands between this bathroom and its best fixture.

Get my free quote