Our Damascus crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Clackamas County within days.
Written quote at no cost, one callback, no chasing afterwards.
Looking to swap your old soak tub for a modern step-in space today? Our local crew delivers fast upgrades that make your daily routine way easier!
Every morning starts off better when you do not have to climb over a high tub wall. Actually, taking out that clunky old basin frees up major floor space in your washroom... It instantly makes the whole area feel bigger and way more modern. Besides that, you get a clean bathing space that fits how you actually live.
Eventually, those deep tubs just turn into dust collectors and giant trip hazards. Honestly, most folks rarely take long baths anyway after a busy work week. So, swapping that basin for a low-threshold basin just makes pure sense for everyday life. Plus, the clean lines give your house an automatic upgrade without full remodeling stress.
Moreover, working with our local team means you get straight answers and fast help right in your area. For instance, homes up in Clackamas County often have older cast iron tubs that weigh an absolute ton! We come out, measure everything exact, and haul that heavy junk away for you. Therefore, you do not have to break your back trying to DIY a massive tear-out job yourself.
First off, safety is huge for everyone living in your home today. Statistically, most home accidents happen right when people try stepping out of slick, high-walled tubs. So, removing that giant hurdle helps protect your knees and keeps grandma safe too...
Furthermore, you save a ton of time cleaning those gross corners. Old tub surrounds love to collect nasty soap scum and green mildew along the bottom seal. On top of that, modern non-porous wall acrylic wipes down in like two minutes total! Which means you spend way less time scrubbing on your hands and knees every weekend.
In addition, your monthly utility bills might actually drop down a bit. Filling up a massive fifty-gallon tub burns through tons of hot water every single time. Instead, a smart water-saving sprayer gives you a great soak while using half the power. Consequently, your hot water tank does not run out of juice while you wash your hair.
Naturally, you want your new washing setup to look amazing and last for decades. Today, high-tech composite materials give you the warm feel of real stone without the high price tag. What is more, these custom panels seal up tight so water never sneaks behind your dry wall.
To give you a better idea of what fits your budget, check out this simple breakdown of popular features below:
| Feature Choice | Daily Benefit To You | Maintenance Level |
|---|---|---|
| Low-Step Threshold | Prevents tripping and allows easy access for everyone | Super Low |
| Built-In Wall Benches | Gives you a relaxing spot to sit and shave comfortably | Very Easy |
| Corner Storage Caddies | Keeps shampoos off the floor and organized nicely | Simple Wipe |
Besides those great options, textured non-slip flooring comes standard on every single project we do. Realistically, nobody likes slipping around on slick wet floors while trying to wake up early. Therefore, this textured surface keeps your feet planted firm while you enjoy your morning wash.
Also, slide-bar sprayers let you adjust the water height for anyone in the family. Whether you are tall or short, the head slides up and down instantly with one quick click. Additionally, it makes washing the dog about ten times easier than using a traditional bucket!
Obviously, home improvement costs are a big deal for any smart homeowner. In our charming community of 12,024 residents, house values stay super strong year after year. Currently, the median household income sits around $92,883, so folks want real quality that protects their house value.
Fortunately, replacing a basin with a stylish step-in base yields one of the highest returns around. Potential home buyers actively search for updated washrooms with modern walk-in features these days. As a result, you get to enjoy the luxurious feel now while building solid home value for later down the road.
Furthermore, our team respects your hard-earned money and keeps pricing totally straight up. We do not do shady high-pressure sales games or hide random fees at the end of the job. Instead, we show up, inspect your plumbing, and hand you a accurate estimate that stays solid.
Right off the bat, you might worry about your house turning into a messy construction site for weeks. However, our trained workers use specialized dust barriers to keep your hallway totally spotless. Which means your main living space stays clean while we tear out the old cast iron.
Next, we inspect the subfloor and old pipe valves for any hidden water damage or leaks. Often times, old homes under the 97089 ZIP code have tiny leaks hiding behind the original wallboard. Consequently, fixing those structural spots early keeps your brand new walls rock solid for many years to come.
Then, we install the heavy-duty base pan and custom wall surround completely water-tight. After that, we hook up your sleek new faucets, grab bars, and sliding glass enclosure doors. Finally, we clean up every single piece of trash so your washroom is ready to use right away!
Indeed, every single family uses their wash station a little bit differently daily. That is why we offer custom grab bars that actually look like stylish chrome towel racks. So, you get ultimate safety support without making your room look like a dull hospital ward.
On top of that, built-in recessed niches hide all your big shampoo bottles neatly out of sight. No more clunky wire racks rusting over your faucet or falling off the wall unexpectedly... Instead, everything sits clean, organized, and right at your fingertips when you need it.
Meanwhile, custom glass doors eliminate those gross, sticky plastic curtains for good! Clear tempered glass lets natural sunlight bounce around the whole room, making it look huge. Plus, special water-repellent glass coatings stop ugly hard water spots from forming over time.
Granted, watching home makeover shows on TV makes home plumbing look super easy to pull off. But, pulling out heavy cast iron tubs usually ends up cracking tile and breaking rusty drain pipes. Thus, a fun weekend DIY project quickly turns into a costly nightmare full of flooded floors.
In fact, improper waterproofing behind the wall panels is the leading cause of hidden mold growth in homes. If you mess up the seal by even a fraction of an inch, water rots your subfloor out. Therefore, letting seasoned local pros handle the waterproofing gives you total peace of mind for the long haul.
Additionally, standard store kits usually do not fit older home layouts properly anyway. Our custom-measured pans match your exact floor footprint so you do not lose precious room space. Which means you avoid weird floor gaps and cheap-looking transition strips near your doorway.
Now, taking the first step toward your dream washroom is completely stress-free and easy! Our local experts are ready to visit your house and check out your current setup firsthand. Then, we answer all your questions and help you design a space that fits your exact taste.
Why keep struggling with that high tub wall when a beautiful step-in layout is right around the corner? Remember, our home estimates are totally free and come with zero obligation to buy anything on the spot. So, you can review the pricing, check your options, and decide whenever you feel ready!
Ultimately, you deserve a warm, relaxing wash space that makes daily life safer and way more pleasant. Contact our friendly team right now to schedule your free home visit and quote today! We look forward to helping you transform your home into something truly special real soon.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Damascus repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Clackamas County; the statewide picture lives on Oregon; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote