Our Bryant crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in King County within days.
Written quote at no cost, one callback, no chasing afterwards.
If you feel trapped by a bulky basin that you never actually fill with water, you are not alone. Many homeowners in our beautiful corner of King County are realizing that their daily routine deserves something much more practical. We specialize in swapping out those old, high-walled basins for modern, walk-in washing spaces that fit your lifestyle perfectly.
Imagine stepping into a spacious, barrier-free area every single morning without having to climb over a steep ledge. This simple change instantly opens up your floor plan and makes your entire washing area feel like a high-end spa. Since you probably just want a quick, refreshing wash rather than a long soak, this upgrade makes total sense.
Fortunately, our team of local installers is ready to visit your home and map out this transformation for you. We offer a completely free estimate to help you understand the process and plan your budget without any pressure. You will love how easy it is to breathe new life into your old home layout.
First of all, safety is a massive benefit that you cannot ignore. Climbing over a slippery porcelain wall when you are wet and tired is a recipe for a nasty slip. By removing that hazard, you protect your joints and give yourself peace of mind for years to come.
Additionally, cleaning becomes a total breeze once you make the switch. Old basin structures tend to trap mildew and soap scum in hard-to-reach corners and grout lines. Our modern, non-porous surfaces wipe down in seconds, which means you get to spend your weekends enjoying life instead of scrubbing on your hands and knees.
On top of that, your daily efficiency will skyrocket. Most of us are in a rush during the workweek, so having a streamlined space to wash up saves precious minutes. You get in, get clean, and get out without any fuss or wasted water.
To start, you can customize your new setup with low-profile bases that remove any tripping hazards. This is especially helpful if you plan on staying in your home long-term as you grow older. We install heavy-duty, beautiful pans that handle daily wear with ease.
Next, we can integrate smart storage solutions directly into the wall panels. This lets you organize your shampoos, soaps, and razors without cluttering up the corners. You can even choose built-in seating for an extra layer of relaxation while you wash.
To give you a better idea of what to expect, here is a quick comparison of the two setups:
| Feature | Old Basin Setup | New Walk-In Setup |
|---|---|---|
| Step-In Height | 15 to 20 inches | 3 inches or less |
| Cleaning Effort | High (lots of corners) | Very Low (smooth walls) |
| Floor Space | Feels cramped | Feels open and airy |
As you can see, the benefits of making this change are quite clear. You get more safety, better looks, and less physical work to keep the space clean. It is an investment that pays off every single day.
If you live near the local creek or close to the main highway in our cozy community of 2,003 residents, you know how important home value is. With a median household income of $97,458, local families appreciate quality work that actually lasts. Upgrading your property with high-quality materials is a proven way to protect your biggest asset.
When potential buyers look at a home, they often dread seeing an outdated, blue or pink porcelain basin. They want to see a sleek, modern washing space that looks like it belongs in a luxury hotel. By doing this update now, you get to enjoy the upgraded style yourself while boosting your future resale value.
Furthermore, our team knows the local building codes inside and out. We handle all the permits and plumbing adjustments required in the local area, which means you do not have to worry about a thing. We treat your home with the utmost respect from start to finish.
First, we start with a friendly, in-home consultation to look at your existing setup. We measure your space, check your plumbing lines, and talk about your favorite style options. This allows us to give you an accurate, free quote right on the spot.
After that, we help you choose the perfect materials and colors to match your existing decor. Whether you like a classic subway tile look or a modern solid-panel design, we have options for everyone. We make sure the style matches your personal taste perfectly.
Once the plan is set, our skilled installers get to work. We carefully remove your old heavy basin, inspect the subfloor for any hidden water damage, and reinforce the plumbing. Then, we install your beautiful new system with precision and care, often completing the job faster than you think.
If you are ready to stop climbing over that old ledge and start enjoying a beautiful, open washing space, we are here to help. Our local crew is proud to serve the wonderful people of this Pacific Northwest community. We bring years of hands-on experience directly to your doorstep.
Do not let another day go by feeling frustrated with your cramped, outdated bathroom layout. Simply reach out to us to schedule your free, no-obligation consultation today. We will sit down with you, answer all your questions, and show you how simple this project can be.
By choosing our local team, you get top-notch workmanship, friendly service, and a final product that will make you smile every morning. Let us help you turn your dream bathroom into a reality. Contact us now to get started!
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Bryant repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at King County; the statewide picture lives on Washington; the wider region is the West; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote