Our Attalla crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Etowah County within days.
Written quote at no cost, one callback, no chasing afterwards.
Maybe you feel tired of stepping over that high, dangerous porcelain barrier every single morning just to wash off. That heavy cast-iron beast takes up way too much room in your tiny washroom and honestly nobody in your house even takes baths anymore. This means you are wasting precious square footage on a dusty basin that only collects soap scum and dog hair.
By swapping that clunky old tub for a sleek, low-profile walk-in stall, you instantly open up your room and make your daily routine a breeze. Imagine having a bright, open space where you can just step right in without balancing on one wet foot. It is all about reclaiming your floor space and making your daily life much safer and way more comfortable.
Our team of local builders specializes in tearing out those outdated basins and replacing them with beautiful, modern walk-in setups. We come straight to your home to look at your layout, measure the area, and give you a completely free project estimate. You do not have to guess about the price because we lay it all out for you clearly from the very start.
Think about how much easier your mornings will be when you do not have to perform a high-wire balancing act. Many homeowners do not realize that the bathroom is actually the most dangerous room in the house due to slippery porcelain edges. Removing that high wall eliminates a major tripping hazard for everyone in your home, from toddlers to grandparents.
Besides the obvious safety upgrade, this smart swap also makes your bathroom look twice as big as it actually is. Acrylic pans and beautiful wall panels reflect light much better than a deep, dark iron well. This lets you enjoy a bright, airy atmosphere that feels more like a private spa than a cramped utility closet.
To help you compare the two options, we put together a quick table showing how a modern walk-in setup stacks up against your old basin:
| Feature | Old Deep Basin | Modern Walk-In Setup |
|---|---|---|
| Entry Height | Usually 15 to 18 inches | Often less than 3 inches |
| Cleaning Effort | High (lots of bending over) | Low (easy wipe-down walls) |
| Water Usage | High (requires filling up) | Low (efficient drainage) |
| Floor Space | Feels cramped and bulky | Creates an open, roomy feel |
On top of those daily benefits, this upgrade can actually boost the overall value of your property. Most modern buyers prefer a spacious, easy-to-clean stall over a dusty tub they will never use. Which means you are not just upgrading your daily routine, but you are also making a smart investment for the future.
Now, you might worry that this kind of remodeling job will turn your home into a dusty disaster zone for weeks. However, our experienced crew has this down to a science, often wrapping up the main installation in just a couple of days. We protect your floors, seal off the work area, and clean up every speck of debris before we leave.
First, we carefully extract the old fixture without damaging your existing wall studs or floor joists. This lets us inspect the hidden plumbing underneath to make sure there are no slow leaks or rotten wood. If we find any old water damage, we fix it right then so your new build rests on a rock-solid foundation.
After that, we run the new drain lines and install a high-quality, slip-resistant base pan. Then we install gorgeous, waterproof wall surrounds that protect your drywall from moisture and mold forever. This means you get a tight, leak-free seal and beautiful walls that you never have to scrub with harsh chemicals.
This is where the fun starts because you get to design a space that fits your exact personal style. You can choose from modern subway tile patterns, rich stone-look panels, or clean minimalist finishes. Adding features like built-in corner caddies, sturdy grab bars, or a comfortable fold-down seat is super simple during this phase.
Another great option is upgrading your fixtures to a rainfall showerhead or a handy handheld sprayer. This lets you wash hard-to-reach areas easily and makes rinsing down the walls incredibly simple. You get to customize every single detail to match your physical needs and your design taste perfectly.
We love working right here in Etowah County, helping folks modernize their homes one bathroom at a time. If you live near the local historic depot or down toward the Coosa River, we are just a quick drive away. Our crew knows the local building codes inside and out, so you know the job is done right.
Because we serve the historic city of Attalla, Alabama, we understand the unique plumbing challenges in our older local homes. With a cozy community of about 5,847 residents, we treat every customer like our next-door neighbor. We know that the median household income here is around $40,998, so we keep our prices fair, honest, and highly competitive.
Whether your home is in the 35954 ZIP code or nearby areas, we are ready to drive out to your property. We bring material samples directly to your door so you can see and feel the quality before making any decisions. Our goal is to give you a gorgeous, durable space without stretching your household budget thin.
When you contact us for your free quote, we do not send a pushy salesperson to pressure you into a deal. Instead, a friendly, knowledgeable installer will visit your home to look at your existing plumbing and measure your space. We listen to what you want, answer your questions, and offer practical solutions that fit your budget.
This face-to-face visit lets us spot any potential issues ahead of time, like outdated galvanized pipes or uneven subfloors. By catching these details early, we can give you a highly accurate estimate with no hidden fees or surprise costs down the road. You get all the information you need to make the best decision for your family.
Why keep struggling with an old, unsafe basin that does not fit your lifestyle anymore? You deserve a beautiful, open space that makes you feel safe and relaxed every time you wash up. Let us handle all the heavy lifting, plumbing, and cleanup so you can just sit back and enjoy the results.
All you have to do is reach out to us to schedule your convenient, no-obligation home assessment. We will look at your layout, discuss your ideas, and hand you a complete, honest price estimate for free. It is the easiest way to start turning your cramped old bathroom into your favorite room in the house.
Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.
Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.
The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.
The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.
Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.
The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.
The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.
Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.
| What you weigh | Low curb | Curbless |
|---|---|---|
| What stands at the entry | A tidy threshold about 3 to 4 inches tall | Nothing. The bathroom floor rolls straight into the shower |
| Cost, installed | The friendlier bracket, most jobs land here | Roughly a third to a half more, the floor is rebuilt |
| What the crew rebuilds | The alcove only; the bathroom floor stays shut | Part of the bathroom floor, sloped and waterproofed |
| Water containment | The curb and glass do the holding | The slope and a linear drain do the holding |
| Suits best | Straight swaps on a budget and upstairs bathrooms | Wheels, walkers, and anyone planning to stay put for decades |
Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.
Removal
Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.
Plumbing
Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.
The base
A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.
The walls
Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.
The glass
A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.
The finish
Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.
| The job | Usual range | Inside the number |
|---|---|---|
| Standard tub-to-shower conversion | $3,100 - $5,600 | Tub out, low curb pan, wall panels, new valve, glass panel. |
| Curbless conversion | $4,900 - $8,800 | The floor is rebuilt flush and sloped to a linear drain. |
| Glass: fixed panel or hinged door | $450 - $1,400 | A single panel sits at the low end, a framed door at the top. |
| Walls: PVC panels or tile | $1,100 - $3,900 | Panels finish in a day; tile adds days and takes any look you want. |
| Tear-out only | $450 - $950 | The tub gone and the alcove left clean for another trade. |
| Small job minimum | around $2,400 | Even the simplest swap books a licensed plumber and a full crew. |
Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.
A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.
Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.
QIs losing the only bathtub a resale mistake?
AAgents around Attalla repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.
QHow long do we go without washing?
AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.
QDoes all the old tile come off the walls?
AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.
QCan the new shower use the tub drain?
AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.
QDo we need a permit for the swap?
AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.
QWhat if there is rot behind the tub?
AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.
The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.
For the bigger map: county seat pages start at Etowah County; the statewide picture lives on Alabama; the wider region is the South; background reading sits on Wikipedia.
One three-day job stands between this bathroom and its best fixture.
Get my free quote