Bathtub To Shower Conversion

Bathtub To Shower Conversion in Amity, Oregon (OR)

Our Amity crew pulls the idle tub, keeps the alcove, and hands back a shower anywhere in Yamhill County within days.

Price my conversion

Written quote at no cost, one callback, no chasing afterwards.

Population
1,782
County
Yamhill County
State
Oregon
Region
West
Median income
$58,750
One alcovethe new shower stands exactly where the tub did
About 3 daysfrom the first cut to the first shower
15 inchesof tub rim you will never climb again
Zero dollarsbefore a written price has your yes on it

Say Goodbye To Your Clunky Old Tub

Maybe you feel tired of stepping over that high, slippery ledge every single morning just to wash off the sleep. That old porcelain monster takes up way too much space in your small washroom and nobody even takes baths in your house anymore. Fortunately, replacing that deep basin with a walk-in stall will give you a modern, open space that makes your daily routine safer and much faster.

This smart update instantly changes the whole feel of your layout by opening up visual space. Because of this, your entire washroom looks twice as big without actually moving any walls around. You get a fresh look that fits your busy life perfectly.

Our team loves helping local homeowners transition away from outdated fixtures that do not serve them anymore. If you live in Yamhill County, we can visit your home to measure everything and give you a clear plan. We will explain how we can swap things out with zero stress for your family.

Why Swapping Your Tub For A Stall Makes Sense

First of all, stepping over a tall barrier with wet feet is a recipe for a nasty slip. By removing that obstacle, you create a safer environment for everyone from young kids to grandparents. This change provides peace of mind because the low threshold reduces fall risks dramatically.

On top of that, cleaning a flat floor with sleek wall panels is ten times easier than scrubbing grime out of old porcelain curves. You will spend your weekends relaxing instead of scraping away soap scum on your hands and knees. This practical benefit alone makes the project worth it for busy folks.

To help you compare your choices, we put together a quick look at how these two setups match up in daily life.

Feature Old Deep Basin Setup Modern Walk-In Stall
Step-in Height High barrier (14-18 inches) Low threshold (1-3 inches)
Floor Space Feel Cramped and bulky Open and airy
Maintenance Hard scrubbing on curves Easy wipe-down surfaces
Water Usage High volume for soaking Efficient, fast drainage

Now, think about how much nicer it will be to walk into a bright, open stall that matches your style. This upgrade brings real comfort and simplicity to your morning. Our local team stands ready to help you plan this transition seamlessly.

Choosing The Right Materials For Your New Space

When we design your new setup, we look at several types of wall surrounds and bases that fit your budget. Acrylic panels offer a very seamless look that resists mold and mildew without needing constant sealing. This means you get a fresh, clean area that stays beautiful with very little effort.

If you prefer a more classic style, beautiful ceramic or porcelain tiles can create a custom look that feels like a private spa. Although tiling takes a bit more time to install, it allows you to customize colors and patterns to match your home perfectly. You get to decide exactly how your new oasis looks and feels.

Besides the walls, we must talk about the base, which can feature a textured surface to prevent slipping. This keeps you safe while you enjoy a hot, relaxing rinse after a long day of work. We will show you all these options when we visit your home for your estimate.

Safety Features That Look Great

Adding grab bars does not mean your bathroom has to look like a cold, clinical hospital room anymore. Modern safety hardware comes in gorgeous finishes like matte black, brushed nickel, and oil-rubbed bronze. These stylish bars blend in perfectly with your design while keeping you stable on your feet.

Another excellent addition is a built-in bench or a folding seat that lets you shave your legs or rest comfortably. This features gives you extra utility and makes your daily wash feel like a high-end experience. You will love how these little details make a huge difference in your daily routine.

The Installation Process Explained Simply

Naturally, you might worry about having your main bathroom out of commission for weeks on end. We understand that pain, which is why our specialized team works fast to minimize disruption in your home. We carefully demo the old heavy basin, inspect the subfloor for hidden water damage, and prep the plumbing quickly.

Which means we do not just cover up old problems; we fix them before installing your new setup. This careful approach ensures your floor stays strong and dry for decades to come. We take pride in doing the job right the first time so you never have to worry about leaks.

After prepping the area, we install the new drain, secure the pan, and build the beautiful new walls. This fast turnaround means you can start enjoying your gorgeous new space in just a few days. We keep our work area clean and treat your home with total respect.

Water Damage and Plumbing Inspections

Behind those old walls, hidden moisture often rots the wood framing over years of slow, silent leaks. When we tear out the old fixture, we examine the studs and plumbing pipes closely to ensure everything is dry. This step protects your home investment and prevents mold from growing behind your new walls.

If we find any old copper or galvanized pipes that look ready to fail, we replace them with modern, durable lines. This preventive work saves you from expensive repairs down the road. You can rest easy knowing your new setup is solid from the inside out.

Local Service You Can Trust

Living in a lovely small town of 1,782 residents means community and trust matter more than anything. We love driving through Yamhill County to help our neighbors improve their homes with practical, beautiful upgrades. Our goal is to provide top-notch service that makes you proud to recommend us to your friends.

Since the median household income in Amity, Oregon is $58,750, we know how important it is to spend your hard-earned money wisely. We offer fair, transparent pricing without any hidden fees or high-pressure sales tactics. We treat you like family because we live and work in the very same area.

Whether your home is near the local wineries or right in the heart of the 97101 ZIP code area, we are just a short drive away. We know the local building codes inside and out, which ensures your project is completely compliant and safe. You get local expertise and friendly faces every step of the way.

Get Your Free Estimate Today

Thinking about remodeling can feel overwhelming, but taking the first step is actually incredibly simple and free. We will come out to your house, look at your current layout, and discuss your ideas. This visit does not cost you a single dime, and there is absolutely no pressure to buy.

This free consultation lets you ask all your questions and understand the total cost before making any decisions. We will provide a detailed quote that outlines everything clearly so you can plan your budget. You deserve to know exactly what to expect from your home improvement project.

So, why keep struggling with that old, bulky tub when you could have a beautiful, easy-to-use stall? Contact us today to schedule your free home visit and take the first step toward a safer, more open bathroom. We look forward to helping you transform your home into a place you love even more!

Why the tub goes in Amity

Count the baths your household actually ran last year. In most homes we visit, the honest number is somewhere between zero and three, and yet every single morning somebody swings a leg over fifteen inches of porcelain rim to stand up and shower inside a fixture built for lying down. The tub charges rent daily and works a few evenings a year.

Nothing dramatic follows from that. Nobody is in danger because a bathtub exists, and if long soaks are part of your week, keep the tub and enjoy it with our blessing. The case for the conversion is plainer: when the tub has become a shower tray with high sides, you are paying, in caution and in cleaning, for a feature you retired years ago.

The swap itself is smaller than most people picture. The supply lines, the drain and the alcove walls are already exactly where a shower wants them, which is why this is a job measured in days. We are not building a new bathroom; we are letting the one you have stop pretending it still gives baths.

Three days, wall to wall in Amity

The same alcove, photographed the way the week actually unfolds. Weather never delays this one; it all happens indoors.

Day one

Out with the tub, in with the rough plumbing

Floors along the hallway get covered, the water goes off for a few hours, and the bathtub is cut free and carried out, tile flange and all. With the alcove stripped, the plumber moves the drain to where the new pan wants it and sets the new valve at shower height. By supper the room is bare, clean and ready.

The old bathtub cut loose and carried out of the alcove
The old bathtub cut loose and carried out of the alcove
Drain and valve reworked in the open alcove
Drain and valve reworked in the open alcove
Day two

The pan goes down, the walls go up

The base arrives first: an acrylic pan set dead level on a mortar bed, or a sloped, waterproofed floor when the plan says curbless. Then the walls close in, either grout-free panels bonded in a single afternoon or backer board ready for tile. Everything from here on is watertight before it is pretty.

A low curb shower pan bedded level in the alcove
A low curb shower pan bedded level in the alcove
Wall panels closing over the waterproofed alcove
Wall panels closing over the waterproofed alcove
Day three

Glass, silicone and the first shower

The glass panel or door is drilled, hung and plumbed straight, the trim goes on, and the silicone lines are drawn last. Silicone wants a day to cure, so the first shower usually happens the following morning, which is exactly how we schedule the walkthrough.

The fixed glass panel being set beside the opening
The fixed glass panel being set beside the opening
The finished shower standing where the bathtub was
The finished shower standing where the bathtub was

Low curb or no curb in Amity

Both are real showers in the same alcove. The difference is the entry, and what has to happen under it.

What you weighLow curbCurbless
What stands at the entryA tidy threshold about 3 to 4 inches tallNothing. The bathroom floor rolls straight into the shower
Cost, installedThe friendlier bracket, most jobs land hereRoughly a third to a half more, the floor is rebuilt
What the crew rebuildsThe alcove only; the bathroom floor stays shutPart of the bathroom floor, sloped and waterproofed
Water containmentThe curb and glass do the holdingThe slope and a linear drain do the holding
Suits bestStraight swaps on a budget and upstairs bathroomsWheels, walkers, and anyone planning to stay put for decades

Undecided is a fine answer on the form. The site visit settles it with a tape measure, not a sales pitch.

What we do while the bathroom is ours in Amity

The tub leaves whole or in pieces

Removal

The tub leaves whole or in pieces

Cut free, hauled out and off to recycling, with floors and doorways shielded on the way. The loudest hour of the conversion, and it wraps before most jobs have begun.

Drain, trap and valve reset

Plumbing

Drain, trap and valve reset

Tub drains sit at one end; showers drain where the pan says. We move what needs moving and swap the old valve for a pressure-balanced one.

Pan or sloped floor

The base

Pan or sloped floor

A level acrylic pan for most swaps, a mortar-built sloped floor for curbless plans. Either way it is tested with water before anything covers it.

Panels or tile, sealed tight

The walls

Panels or tile, sealed tight

Grout-free panels go up in an afternoon and wipe clean forever. Tile takes longer, costs more, and looks like whatever you can imagine.

Panel or door, hung plumb

The glass

Panel or door, hung plumb

A fixed panel keeps things open and easy to clean; a hinged door closes the warmth in. Both are tempered, both are set dead straight.

Trim, silicone and handover

The finish

Trim, silicone and handover

Shelving, the hand shower, clean caulk lines and a walkthrough. We leave the cure time in writing so the first shower is not a gamble.

What the swap costs in Amity

The jobUsual rangeInside the number
Standard tub-to-shower conversion$3,100 - $5,600Tub out, low curb pan, wall panels, new valve, glass panel.
Curbless conversion$4,900 - $8,800The floor is rebuilt flush and sloped to a linear drain.
Glass: fixed panel or hinged door$450 - $1,400A single panel sits at the low end, a framed door at the top.
Walls: PVC panels or tile$1,100 - $3,900Panels finish in a day; tile adds days and takes any look you want.
Tear-out only$450 - $950The tub gone and the alcove left clean for another trade.
Small job minimumaround $2,400Even the simplest swap books a licensed plumber and a full crew.

Wall condition, drain position and the glass you choose move every line. The visit pins the figure down, and the figure then holds.

What your plumber will find

A bathtub drains at one end through its own trap; most showers want the drain nearer the middle, or along one edge when the plan is curbless. Sometimes the existing trap is close enough to reuse and sometimes it has to travel a foot or two, which means opening a strip of floor. We can usually tell which from the basement or the crawl space during the visit, and the paperwork you sign already names which one you are getting.

Houses older than the seventies like to add a surprise: galvanized supply lines rusted nearly shut, a cast iron trap that crumbles at a touch, or framing that got damp decades ago and kept it quiet. None of it is rare and none of it is ruinous, but it is your call, not ours. When something like that turns up, work pauses, you get photographs and a price for the fix, and nothing is billed until you have said yes to it. A conversion should never be the job where the invoice writes itself.

Asked before the demo bar comes out

QIs losing the only bathtub a resale mistake?

AAgents around Amity repeat one rule: a family house shows better with a tub somewhere in it. If this is your only tub and small children are in your plans, we put that on the table during the visit and you decide with open eyes. If another bathroom keeps its tub, or the buyers you expect are shower people, the argument evaporates.

QHow long do we go without washing?

AThe toilet and sink stay usable every evening, and the water is only off for stretches on day one. The shower itself is ready once the silicone cures, so figure on missing roughly three days of showers at home. Plenty of clients time the job before a weekend away.

QDoes all the old tile come off the walls?

AOn the alcove walls, yes, because the new waterproofing needs to start from the studs, not from forty-year-old grout. Tile outside the alcove stays put, and we cut a clean line where the two meet.

QCan the new shower use the tub drain?

AThe pipe itself is nearly always reusable; the position is the question. A low curb pan can often sit its drain within reach of the old trap. Curbless floors want a relocated or linear drain, and that difference is priced before demo, never discovered after.

QDo we need a permit for the swap?

AA like-for-like fixture swap usually rides on a simple plumbing permit, and moving the drain can add an inspection. We file whatever your jurisdiction wants and fold the cost into the written price.

QWhat if there is rot behind the tub?

AIt happens, mostly around the old tile flange. You get photographs the hour we find it, a firm price for the repair, and the choice to proceed or pause. The framing fix is usually a morning, not a remodel.

Streets and showers near Amity

The map carries the geography; the link lists underneath spell out every town our crews can reach from this one.

Amity in short

StandingIncorporated place
Population1,782
ZIP codes97101
Land area0.6 sq mi
Density3,000 per sq mi
Median income$58,750

For the bigger map: county seat pages start at Yamhill County; the statewide picture lives on Oregon; the wider region is the West; background reading sits on Wikipedia.

Bathrooms we convert around Amity

Conversions booked across Oregon

One three-day job stands between this bathroom and its best fixture.

Get my free quote